NebraskaPeteGeek

A Yorkshire Natural Apple Restoration

September 10th, 2024
Photographed and written by

John M. Young

Just when I think I have moved on from my fascination with World War Two pipes I get drawn back in. Though this old pipe is more of a reminiscence of my youth and the semi annual visits to Sears for new school clothes. The candy counter was within the first 20 yards of the entrance and I could usually count on a white paper sack with a dollar’s worth of Swedish fish to help tide me through the horrendous task of trying on new clothes. I do not recall seeing pipes under the glass counter. I do recall that this was the only way I had ever seen Swedish fish though. Why the mention of Sears in this introduction? Well, I guess you will just have to read the “Background” for the answer to that question.

This lovely old Yorkshire Natural appears to live up to it’s name – natural. There seems to be little stain and no finish coating. The stamps on the left shank read; Yorkshire (script style lettering) arched (concave up) over NATURAL over ALGERIAN BRIAR arched (concave down).

This was looking like a straightforward restoration. Yes there were a lot of fills that I wanted to redo but other than that the pipe was in great condition. The stem was not badly oxidized and the bowl was not heavily caked.

Background

OK, you have waited long enough. Here is the reason for my back to school clothes /Swedish fish stroll down memory lane. According to pipedia.org, “Yorkshire Pipes was a brand sold exclusively through Sears Roebuck Catalogs, as seen in this 1941-42 catalog page. They were made in France of Algerian Briar, and some of the model names were: Bond Street, Royal, Aristocrat, Natural and Straight Grain. They were not stained nor finished with laquer, and had a natural honey color.”

Quote and photos fromYorkshire – Pipedia.

Also from the pipedia.org entry is an image of a 1941-42 Sears and Roebuck catalog:

Yorkshire – Pipedia

For a second source confirmation of the heritage of the Yorkshire Natural in hand, I turned to pipephil.eu. Here I found the below images. Again it is confirmed that Sears & Roebuck sold the Yorkshire brand of pipes but here they mention that the pipes were made by Gasparini.

This creates a bit of confusion in my old damaged brain. The pipedia.org entry states a French manufacturer and the pipephil.eu entry states Gasparini. Last time I checked, Gasparini was and is an Italian maker. In examining the stamps the Yorkshire Natural that I have has stamps identical to the image from pipedia.org on the far right. So, I’ll say that this old girl is a French made apple from the 1940’s-1950’s. I know, not very specific with either part of the provenance. That might be the reason this blog is free – lazy Gen-X slacker of an author…

This next part is a little thought that I had and found entertaining. The location of the Sears of my youth was Omaha (yeah, that’s where I grew up). Sears was at a mall called Crossroads Mall. It was opened in 1960. The below photo shows the Sears entrance in 1961 with a crowd of people waiting to get in. I actually remember sitting there like that once.

(https://omaha.com/photos-crossroads-mall-through-the-years/collection_086b8140-a744-5e25-a662-8e2aaba4858b.html#40)

The second photo below, is an image of Sears from 2019 taken from the same side of the building.

(https://omaha.com/photos-crossroads-mall-through-the-years/collection_086b8140-a744-5e25-a662-8e2aaba4858b.html#40). The entire mall lasted a mere 59 years, three generations of people. Now I find the fact that the entire mall was built, utilized and destroyed in about ½ the time that this single little pipe from the same company has been around, amazing. Businesses and buildings come and go but the pursuit of a relaxing smoke and the contemplation that it brings is a human pursuit which has survived for centuries. Enough of me blathering on let’s get to the restoration.

The Restoration

Here is our star taking up position on a clean piece of denim on the workbench.

The reaming crew was gathered; PipNet with #2 and #3 blades, Smokingpipes Low Country reaming knife, General triangular scraper (with the tip ground off) and 220 sandpaper wrapped around a wood dowel all atop a plastic coated shipping envelope.

The PipNet with the #2 blades did the lion’s share of the work, again. The #3 blades were too tight of a fit so the Kleen Reem pipe tool was used. It actually was a touch too small when fully extended but I pressed sideways with it around the bowl. The scrapers were used to finish the scraping.

The reamed bowl showed no signs of any damage from excessive heat. The chamber was sanded with 220 sandpaper on the wood dowel and 320 sandpaper with my finger.

The shank was far dirtier than I figured it would be. The initial wetting of the airway with 95% ethyl alcohol on cotton swabs produced a heavily blackened cotton. I then poured 3-4 ml of the alcohol into the bowl and scrubbed with a nylon shank brush. I then poured the alcohol into a medicine cup. This airwar would require a lot of scraping with the dental pick to clear as much of the accumulated tar as possible before further scrubbing.

Several scrapings later, the scrubbing with the nylon shank brush and the cotton swabs started to work their way through the accumulated smoking residue and eventually the airway was cleaned.

The stem proved much easier to clean than the shank. Apparently the previous steward was not averse to using a pipe cleaner on occasion. The airway was cleaned with bristle pipe cleaners dipped in 95% ethyl alcohol.

I then took the stummel to the sink for a scrubbing with undiluted Murphy Oil Soap and a nylon scrub brush. The soap was rinsed with warm water and dried with a cotton hand towel.

Back at the workbench the stummel was wiped with a make-up pad dipped in 95% ethyl alcohol. Very little color came off the briar indicating that surface was bare wood. Most of the color on the pad below was from the rim.

I began picking the old fill from the pits on the surface of the stummel. I counted 14 as I went along. The fills were generally solid and required a bit of force with the fly tying bodkin to get them out. ?Why take them out, then?”, you ask. Because I didn’t like the color.

To refill all 14 of the newly excavated pits, I used brown cyanoacrylate (CA, super glue) and briar dust. I dipped the fly tying bodkin into the CA then applied a small amount to the pit and worked it into the hole. I then used the dental scraper to scoop up a tiny scoop of briar dust and piled that onto the wet CA. The dust was then pressed into the pit with the heel of the scraper. Excess dust was brushed off with a brass brush. I only did about 2-4 holes at a time to avoid the CA curing before I had pressed the briar dust into the pit.

With all 14 pits refilled, I used a small flat file to file the CA/briar dust bump off. Then sanded the area with a 400 grit sanding sponge. After all of the pits had received one application and were sanded, I reapplied CA and additional briar dust. The process was repeated until the pits were smooth and flush with the surrounding briar. The stummel was then sanded with a 600 grit sanding sponge and wiped with a make-up pad dipped in ethyl alcohol.

I lightly topped the rim using 320 and 400 sandpaper laid flat on the countertop.

The stummel was stamped NATURAL. I wanted to keep this color finish true to the stamping. My first reaction to a stummel with this number of pits would normally be to give it a contrast dye of black. That would certainly conceal many of the fills but would also violate my sensibilities of maintaining the natural color of the stummel. To lighten the aged briar I decided to treat the wood with an application of oxalic acid. This “bleaches” the surface of the briar and can significantly lighten stained briar. If you are interested in a more heavily stained project see the W.O. Larsen restoration. The oxalic acid was applied with a cotton swab. I wetted the entire exterior 2-3 times and let it sit for 30 minutes before rinsing with copious amounts of was while scrubbing with a toothbrush.

Once dried the stummel looked a bit lighter and more vibrant than it did prior to the oxalic acid.

The stummel then had painters tape placed over the stamp and was sanded with a series of sanding sponges 1000-3500. Between each sponge I wiped the stummel with an alcohol dampened make-up pad.

The stummel was then micro-meshed with 4000-12000 pads. Between the pads I wiped the stummel with make-up pads wetted with ethyl alcohol.

The stummel was then given a coating of Before and After Restoration Balm and allowed to sit for 30 minutes.

After 30 minutes the Restoration Balm was wiped from the stummel using an inside out cotton athletic sock. The grain looked wonderful.

Unfortunately the stem did not look as wonderful. I used a small flat file to smooth the bite zone of the stem. The tooth dents were too deep to file them away without significantly thinning the stem. Filling the depressions with black CA was the chosen repair. I applied a coating of black CA from the button back 1 cm on the top and bottom of the stem. Both sides were then spritzed with a CA drying accelerator. I then shaped the button and smoothed the stem with the flat file. I then started smoothing and blending the patch with 320-600 grit sanding sponges. Between the sanding I rubbed mineral oil onto the stem with my fingertip and wiped away the excess with a dry paper towel.

The shank was taped with painters tape to protect it from the stem sanding. I needed them together to keep from rounding the joint where the stem meets the shank and to provide a handle for the stem.

The stem was sanded with a series of sanding sponges from 600-3500. Between sponges I rubbed the stem with mineral oil and wiped the excess with a dry paper towel.

I then polished the stem with micro-mesh pads 4000-12000. Between each pad I rubbed the stem with Obsidian Oil and wiped the excess with a paper towel.

At this stage I looked at the stem under the bright lights at the photography station. There was still a faint brown visible. I reapplied the painters tape to the shank and took the stem to the buffer. There I buffed the stem with white diamond buffing compound. After wiping the stem with a make-up pad moistened with ethyl alcohol I returned to the bright lights and the brown was gone. I returned to the bench and used Before and After Fine Polish of a soft cotton cloth.

The Before and After Extra Fine Polished was used after the Fine Polish with the same cotton cloth.

The pipe was returned to the buffer where I applied several coats of carnauba wax to both the stem and stummel. The final step was hand buffing the pipe with a microfiber polishing cloth to raise the shine before the final photography session.

I am very pleased with how this Yorkshire Natural Apple turned out. The grain of the briar is beautiful. Yes all the fill detract from the finish but it was an everyman’s mail order pipe from Sears and Roebuck. The stem polished up well and provides a sharp contrast with the light natural briar. Both stem and stummel sport a high gloss finish that complements the other. The shape of the robust apple bowl feels great which is good because the length and mass of the pipe are a bit much for a comfortable clencher. Perhaps one of those rubber cushions would help.. The dimensions of this Yorkshire Natural Apple are:
- Length: 5.61 in./ 142.94 mm.
- Weight: 1.48 oz./ 42.10 g.
- Bowl Height: 1.78 in./ 45.21 mm.
- Chamber Depth: 1.32 in./ 33.53 mm.
- Chamber Diameter: 0.80 in./ 20.32 mm.
- Outside Diameter: 1.59 in./ 40.39 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Loading…

Type your email…

Below are some photos of the finished Yorkshire Natural Apple.
A W.Ø. Larsen 85 Bent Billiard Restoration

September 5th, 2024
Photographed and written by

John M. Young

I am only speaking for myself here as your results may vary but, I have found that alcohol consumption fails to make my decisions or their results better. I think that may have been the case with this lovely little Larsen as well. When I first got the pipe I was quite pleased with its appearance. Closer examination soon revealed a layer of Scotch tape around the tenon. “Hmm, that is not normal”, I thought. I then carefully removed and examined the tape and tenon. I immediately thought that a previous steward had broken or cracked the tenon but all was well there. Another “Hmm”. The shank was then examined. All I could think is; “What?”, “Why?” and “Huh?” Yeah, I ran out of “W” words. The mortise appeared to have two extra attempted drill holes widening the mortise significantly thus requiring the thickening of the tenon with the Scotch tape. I envisioned a scene where the previous owner just finished off a 750 ml bottle of some 40% ethyl alcohol and the movie The Driller Killer and decided to turn this Larsen into a Peterson System pipe. See the first sentence of this blog.

Regardless of the origin story of this Larsen and how it came to be, the pipe was certainly worthy of some restorative care. The pipe was stamped 85 over WØ LARSEN over MADE IN DENMARK perpendicular to the axis of the shank. Below are some photos of the Larsen when it arrived here.

The glaring repair to the mortise, shank and airway was the major task. The pipe otherwise looked to be in very good condition. There was some staining around the shank/stem joint probably from tars and condensation leaking around a bad mortise tenon fit. The acrylic stem had minimal wear.

Background

The first section of the quote below is from pipedia.org and is credited to “FinePies.Com.

“W.Ø. Larsen was one of the most famous tobacco shops in Copenhagen, with a beautiful store located on Copenhagen’s famous “Walking Street.” During the flowering of the Danish pipe in the 1960’s, they first began retailing pipes by such carvers as Sixten Ivarsson, Sven Knudsen, Poul Rasmussen, and Brakner.

Urged on by his store manager Svend Bang (S. Bang), the owner, Ole Larsen, decided to begin making pipes in the basement of the shop. He first hired Sven Knudsen as the pipe maker, who soon passed the job to his protégé Hans “Former” Nielsen. Larsen’s fortunes rose along with the rest of the Danish pipe business, and Former was soon managing a group of carvers in the old Larsen cigar factory. Among these were Teddy Knudsen, Tonni Nielsen, Jess Chonowitsch, Peter Hedegaard and others, who were responsible for the Select and Straight Grain series before they branched out on their own. After Former left to start Bentley pipes in Switzerland, his duties were taken over by Soren Refbjerg Rasmussen, while the Straight Grains were made by Teddy’s student Benni Jorgenson. As Ole’s health began to fail, the reins were taken over by his son Nils. Nils became convinced that the way for Larsen to prosper was by entering the low-end market, and acquired the Georg Jensen pipe factory to make an array of less expensive pipes. This turned out to be a fatal error, and Larsen was recently sold to Stanwell, who continue to produce so-called “Larsen” pipes in their huge factory. Thus ended an important part of Danish pipe history. Courtesy, FinePipes.com”(W.Ø. Larsen – Pipedia)

The next section also from pipedia.org

“From The History of Danish Pipes, by Jakob Groth

The workshop of W.Ø.Larsen

W.Ø.Larsen is Denmark’s oldest and probably most famous pipes and tobacco store, placed in the center of Copenhagen on the main pedestrian street, Stroget. If you visit Copenhagen and do a “pipe crawl” this store is a must. In the beginning of the 1960’s the store began to sell Danish hand-made pipes, especially those of Poul Rasmussen. This went very well and Poul Rasmussen could not keep up with the demand. W.Ø.Larsen, with their dynamic business manager Svend Bang (who later started his own pipe business), decided to establish their own workshop in rooms next to the store.

The first manager of the pipe workshop was Sven Knudsen, but he soon left to make pipes under his own name. The next manager was Hans Nielsen, also known as “Former” (named after the late British actor George Formby, whom he was said to resemble. Coincidentally, in Danish, “Former” means “shapes”). Under the management of Former the workshop grew and W.Ø.Larsen pipes became a prominent name abroad. Among the prominent pipemakers educated here were Else Larsen (Denmark’s first female pipemaker),Poul Ilsted, Ph. Vigen, Teddy Knudsen, Tonni Nielsen, and Peter Hedegaard.

Typical for the W.Ø.Larsen School were semi-classic shapes, meaning classic shapes, but with slight differences, often bring a little more full or round. The pipes often had lower center of gravity. A typical billard would have a bowl shaped more like a pear and the connection between the bowl and the shank would be clearly distinguished. Yellow and orange were colors more widely used for the finishes.”(W.Ø. Larsen – Pipedia)

Trying to get a date on this Larsen I turned to pipephil.eu. Here under W.Ø.Larsen I found the following images:

The uppermost image shows an identical stem logo to the pipe in hand. It unfortunately does not indicate the age or year of production. I returned to the pipedia.org site to look through the available Larsen catalogs. There are 3 catalogs on the site: A 1960-61, 1961-62 and a 1963. There was no mention of a shape 85 in any of the catalogs and the stem logo on my Larsen was not observed in any of the catalogs. One thing I found interesting is that the shape number 85 is completely absent.

(wo1.pdf (danishpipemakers.com))(red circle added by me). Now this is just me and my conjecturing brain, I think this Larsen is probably a Stanwell made Larsen. My reasoning is twofold: The Crown with LARSEN looks very modern and factory made

The 85 shape is a Stanwell shape. According to pipedia.org’s Stanwell shape number guide:

(https://pipedia.org/wiki/Stanwell_Shape_Numbers_and_Designers)

Numerous sources said that W.O. Larsen was “recently” acquired by Stanwell. I only found one source that defined “recently” – A Facebook entry by Pipes Pens and Much More, “Danish company W. O. Larsen started making pipes during 1950s and it was run by Ole W. O. Larsen (1920-2002), who created the Larsen Handmades. Ole, a reputable designer, was a member of the Academie Internationale de la Pipe and founded, in 1977, the company’s Tobacco Museum which, like the brand shop, closed in 2005. The brand became an associate of Georg Jensen in 1999, with the company having been run, since 1993, by Niels Larsen, the fifth generation of the family in business, until it was bought by Stanwell in 2003.” (https://www.facebook.com/pipespensandmore/posts/danish-company-w-o-larsen-started-making-pipes-during-1950s-and-it-was-run-by-ol/178742246947159/).

During the writing of this blog I sent fellow pipe restorer from Germany, Sascha Mertens a photo of this W.Ø.Larsen pipe. He did a bit of digging and came across a great article in a German blog by Ralf Dings. Mr. Dings, with his much more close to home knowledge discussed the demise of Larsen. The below is from his blog, W.Ö.LARSEN – EINE DÄNISCHE TABAKDYNASTIE and used with permission of the author.

“Niels W.Ö. was still young, but he used what he had learned to ensure that the Larsen name continued to do good business and maintain a brilliant reputation. His idea was to take over the GEORG JENSEN pipe factory to gain a foothold in the now popular segment of inexpensive pipes and thereby broaden Larsen’s range. Unfortunately, this plan turned out to be a fatal mistake, costing Niels W.Ö. so much money that he had to give up and sell to Stanwell. In 1997, what Wilhelm Öckenholt Larsen founded in 1864 came to an end.

Yes, there were and still are tobaccos and pipes that were and are marketed under the still good name Larsen. However, this marketing use has nothing to do with the tradition and the claim of the Larsen family, which filled several pages in the history of pipes. Anyone looking for a real Larsen pipe today, one from the Copenhagen era, should not have to worry about the hundred euro. However, they will receive a smoking device that represents the high-quality Danish classic as well as hardly any other brand could and can.” (https://rallis.blog/2018/09/17/w-oe-larsen-eine-daenische-tabakdynastie/?fbclid=IwY2xjawE4rR9leHRuA2FlbQIxMAABHS8u-DT3fmM6vPbjWxkKlijTt01-xZpdMw9HOUlmPIgewOpEj7t4EO9UTQ_aem_IAfzAO26BRAbx8sarJJUKA)

That would put this pipe’s date of manufacture after 1997 and before 2006, when the shape was discontinued by Stanwell. As for current production of W.O. Larsen pipes by Stanwell all I could find was the following: “Annually, W.O. Larsen features a Pipe Of The Year, designed and manufactured by Stanwell. These are distinctly Danish styles that are truly spectacular.” (https://www.pipesandcigars.com/category/shop-by-brand/wo-larsen/)

The Restoration

This restoration began like others, with a cleaned denim piece as a work surface.

The reaming tools included the PipNet with number 3 blades, Smokingpipes Low Country reading knife, General triangular scraper with tip ground off and a wood dowel wrapped with sandpaper.

The minimal cake was quickly removed with the PipNet.

I lightly scraped with the other scrapers and sanding returned the bowl to fresh briar. There was no indication of any damage to the tobacco chamber

The airway of the shank was next cleaned with cotton swabs dipped in 95% ethyl alcohol.

My plan was to fill the damaged airway with black J.B. Weld epoxy. To keep the epoxy from entering where I did not want it I planned to coat the contact surface of the tenon, a pipe cleaner (for the draft hole) and the end of a cotton swab. The cotton swab tip was to plug the “drilled reservoir” which a previous owner had drilled. I figured that the misguided bloke’s work should not be completely in vain. I will include another photo of the drill grooves I was planning on filling with epoxy, below. There was enough of the correct mortise remaining so, my thought was to fill the two drill paths to the right with epoxy, seat the greased tenon, clamp it to keep the tenon pressed to the left and let the epoxy cure. Hopefully the petroleum jelly would prevent the epoxy from adhering to the tenon. Once cured I could re-drill and smooth the airway.

I failed to photo the application of the epoxy as I was worried about it becoming too tacky. Below is the stem clamped in place.

A couple of hours later I removed the clamp and pulled the stem free. The Vaseline did what I hoped it would do, preventing the epoxy from adhering to the tenon. The airway remained clear of epoxy thanks to the Vaseline coated pipe cleaner and the cotton swab tip kept the epoxy from entering the reservoir. Success on everything so far. I allowed the epoxy to cure for a full two days.

I used a micrometer to measure the diameter of the tenon and discovered that a 5/16 in drill would allow a good fit of the tenon. I stepped the bit down to ¼ for the first re-drilling attempt. Then increased the bit size to the 5/16.

The re-drilling seemed successful and the tenon felt appropriately tight. Below you can see the epoxy patch. I was not happy with the seem around the patch but thought that black cyanoacrylate (CA, super glue) could be used to fill the slight gap to the patch.

The stummel was taken to the sink for a scrub with undiluted Murphy Oil Soap and a nylon scrub brush. The soap was rinsed with warm water and the stummel dried with a cotton hand towel.

Returning to the workbench I wiped the stummel with 95% ethyl alcohol on a make-up pad. A little bit of black stain came off onto the pad.

The scrubbing did little to remove the tar stains around the end of the shank.

I have successfully used oxalic acid to bleach briar previously. I thought that the technique might work here.

I applied the oxalic acid solution with a cotton swab to the unstained shank and set it aside to see if it would lighten the tar stains..

In the meantime I cleaned the pipe stem using 95% ethyl alcohol and bristle pipe cleaners.

A few minutes later I saw a marked lightening of the stained areas. Not completely removed but far better than they were.

I taped off the stem with painters tape to protect it during sanding of the shank and taped over the stamps to preserve them as well.

The shank was sanded with 1000-3500 grit sanding sponges.

At this point I used the black CA to fill the gap between the epoxy patch and the briar shank. I worked fairly well and was lightly sanded using the topping board and 400 sandpaper. There remained a very slight seem or gap. I filled this with clear Thin CA applied with a fly tying bodkin and lightly sanded with a 1000 grit sanding sponge. To reestablish the counterbore of the portise I used a small wood sphere wrapped in 320 sandpaper followed by 400 sandpaper. This was done because I was too lazy to go upstairs and into the garage for a countersink bit.

The end of the shank was touch-up stained black with a Furniture Touch-up Stain marker.

The stem and stummel were reunited and micr0-meshed with the 4000-12000 pads. This polished up the brass accent nicely.

The stem then received a hand buffing with Before and After Fine Polish on a soft cotton cloth.

The Fine Polish was followed by the Before and After Extra Fine Polish with the same cloth.

I worked some Renaissance Micro-Crystalline Wax Polish into the sandblasted surface of the stummel with a baby toothbrush and hand buffed it with a microfiber polishing cloth.

The pipe was then taken to the buffer where the stem and shank end received several coats of carnauba wax with the buffer.

This restoration was a project that required a bit of improvisation. I had never read of another restorer rebuilding a mortise using epoxy. I am sure it has been done as I doubt I am a very original thinker. The results seem to have worked. I have not smoked this pipe and admit that the remedy has not been tested under fire, pun intended. Overall I am quite happy with how this pipe turned out. It is a lovely shape with a great finish. I am looking forward to smoking it and testing out the repair. If you would like to know how the repair holds up feel free to ask in the comments.

The dimensions of this W.Ø. Larsen 85 Bent Billiard are:
- Length: 5.71 in./ 145.03 mm.
- Weight: 2.03 oz./ 57.70g.
- Bowl Height: 2.09 in./ 53.09 mm.
- Chamber Depth: 1.60 in./ 40.64 mm.
- Chamber Diameter: 0.77 in./ 19.56 mm.
- Outside Diameter: 1.62 in./ 41.15 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished W.Ø. Larsen 85 Bent Billiard.

Type your email…

Loading…
A Raskassa Banding

September 3rd, 2024
Photographed and written by

John M. Young

I didn’t call this a restoration because the pipe was unfired when it arrived. Unfired and yet the shank was cracked. Perhaps that is why it had remained unfired. The world may never know. As much as I love a good mystery, I love a good banding project more so, that is what I did.

I am not going to do my usual before and after photo spread with this one since the befores would look so much like the afters it would waste vital electrons. I will however still do the “Background”. One other thing I think I need to clarify: You can purchase bands made specifically for pipe repairs from Vermont Freehand here are their home and bands links (https://vermontfreehand.com/) and (https://vermontfreehand.com/bands-caps-rings/). They have individual bands and assortments ranging from 10mm-25mm in 0.5mm increments. If your time is worth money then this is probably a far better solution than what I am doing with this blog. I like to fashion repairs with what I have available. I am a firearms shooter and reloader, this makes a wide range of brass cylinders, in the form of spent cartridges, available to me. My son-in-law is a plumber thus I have a variety of copper to use. His brother is a machinist thus making an entire machine shop available with a darn good machinist. These may or may not be things available to most people.

Background

Raskassa is a name without much information. Pipedia.org will tell you the following: “There were no results matching the query.” Not terribly helpful. Pipephil.eu has a bit more on “Raskassa” but not much.

(Rag-Rd — Pipes: Logos & Markings (pipephil.eu))

I find the above quote interesting. Otto Sevic has an entry in pipedia.org which contains the following in its entirety: “Mars pipe: According to Wilczak & Colwell in their book titled “Who Made That Pipe?” Mars was manufactured by Otto Sevic in the United States, and dates to 1930. This makes sense if the patent date stamped thereon is July 6, 1926. The side of the pipe is marked: “MARS, PAT. 7.6.26” indicating the design was patented on July 6, 1926. The patent was apparently for a filtering system built into the base of the bowl. The pipe has a chamber built on the bottom of the bowl which is accessed through a black Bakelite cap. Inside is an aluminum chamber to catch moisture coming from the bowl. From the bowl bottom is a tube extending into the chamber and ending there a little above the cap. The cap appears to have an absorbent material like cotton or paper to absorb the moisture. And then through the shank is another aluminum tube which is ported into the shank and the stem is mounted with a normal tenon mount.”

Example and details, courtesy Doug Valitchka

(https://pipedia.org/wiki/Mars). This pipe does not strike me as a pipe produced before the Second World War. The other sentence indicates the pipe pictured on pipephil.eu site is made of Mountain Laurel. That wood was only utilized during the war years and proved to be less than ideal for pipes and was phased out fairly rapidly after the war. The rustication and staining of this pipe make the determination of the wood difficult to impossible.

Another mention of “Raskassa” is made by Steve Laug of repornpipes.com with his restorations of several Malaga Ras Kassa or Malaga Raskassa pipes. Both spellings are used. In a previous blog of a Malaga Apple , I wrote the following:

“Piedia.org has a nice history of Malaga pipes. I will include the text here in its entirety:

“The Malaga Pipe Company was founded circa 1939 by George Khoubesser, (b.1892 d.1971), and located in Royal Oak, Michigan at 1406 East Eleven Mile road. The second generation owner’s name was Emmanuel Khoubesser (b. 1942 d. 1981), who everyone knew him as “Manny”. He was a big jovial man that was easy to converse with, always had a smile and a good joke to tell his very loyal customers. He had the ability to befriend anyone within minutes. The small store was packed with curious customers every Saturday morning looking for the latest design made earlier in the week. He also carried a full line of custom mixed tobaccos that you could sample and an array tobaccos in tins.

I was first introduced to him in 1969. I remember him taking me in the back to show me each step involved in pipe making. He was very serious about the quality of the product he sold and would never sell a flawed pipe, even if it was very minor. My step father purchased several of his pipes and really enjoyed them. He once said he’s never found a better pipe (his words).

Manny passed away in 1981 and his wife and oldest children took over the business. Malaga closed in 1999 after 60 years in business. The building still exists on Eleven mile, looking almost like it did back then, but now houses the Michigan Toy Soldier Company. I would think the pipes Manny produced are now more valuable than ever. If you happen across one of these pipes, you’ll know a little bit more about it’s rich history. Enjoy!”

(Malaga Pipe Company – Pipedia)

If your taste for the history of Malag pipes has yet to be satiated I will refer you to Steve Laug’s blog regarding the history of the brand (George Khoubesser and Malaga Pipes | rebornpipes). Steve also received a treasure trove of ephemera from the estate of one of his reader’s fathers (Malaga Pipes Catalogue of Pipes and Tobaccos | rebornpipes). Wonderful information and valuable insights from people who are far more industrious than I with providing you with background information.” (https://wordpress.com/post/scimansays1787.com/5958)

Now, this pipe does not bear the MALAGA stamping nor is it of a quality associated with Malaga pipes, much less the highest quality produced by that maker. So the question remains, “Who made this pipe?” Malaga stamps are of a block style print

(both of the above from https://rebornpipes.com/2020/06/26/breathing-life-into-a-top-grade-malaga-a-raskassa-dublin/). The stamp on this pipe,

and the Otto Sevic pipes do appear to have the same style of stamp.

(Rag-Rd — Pipes: Logos & Markings (pipephil.eu)) leading me to the conclusion that they have the same maker though I do not think of them from the same era.

The non-restoration

I did not have any nickel plated brass of an appropriate diameter to use for a band. I did have a length of stainless steel that would suffice. I had never thought to make a band of stainless steel so that idea in itself was interesting. I measured the thickness of the band and got out the pipe cutter. The cutting of pipe is pretty much the same no matter the stock to cut. The stainless was far harder than brass or copper but the same procedure.

Slipping the band over the tenon and inserting the stem partially let me imagine or visualize a completed pipe. Not bad but I couldn’t help but wonder what a copper band would look like instead. So, I cut one of those too.

Oh, I liked the copper much better.

The next step was to file the end of the shank to fit the new band. This is a long meticulous and rather tedious process. I wanted the band to be very tight, compressing the cracked shank and providing a good fit of the tenon in the mortise. I was not too worried about a perfect finish of the band to the non-filed shank. The rusticated stained shank could easily blend and conceal any poor-fitting with a little bit of black epoxy from the gluing of the band to the shank.

The proper fit was finally achieved and the band was glued and tapped into place on the shank. The glue used was J.B. Weld black epoxy. Extra epoxy was used as a fill around the gaps between the band and the unfiled shank. The next day the epoxy had cured and was hard enough to file. I wrapped the stem with painters tape to protect it from filing.

The overflow of black epoxy was filed flush with the shank and stem.

The joint was lightly sanded with a 400 grit sanding sponge and touched-up with a black Touch-up marker.

The stem tape was removed and the shank was taped to protect it from the sanding and polishing of the band. The band was sanded with the 2000-3500 sanding sponges then with the 4000-12000 micromesh pads.

For a wax I went with Renaissance Micro-Crystalline Wax applied with a baby toothbrush.

The wax was then hand buffed with a shoe shine brush.

Then the stummel was hand polished with a soft cotton terry cloth.

The stem was buffed with white diamond compound on the buffer then waxed with several coats of carnauba wax.

This banding project turned out very nicely. In the final photo you cannot make out the crack at all. The pipe has a unique rustication pattern which feels great in my hand. The black stain with the copper band gives it an elegant appearance in contrast to the rustic nature of the pipe. The stem needed little work and polished up well. Overall this is a lovely pipe that is amazingly light and should make for a grand smoker.

The dimensions of this Raskassa Pot with a beautiful copper band are:
- Length: 5.61 in./ 142.49 mm.
- Weight: 0.99 oz./ 28.00g.
- Bowl Height: 1.66 in./ 42.16 mm.
- Chamber Depth: 1.45 in./ 36.83 mm.
- Chamber Diameter: 0.85 in./ 21.59 mm.
- Outside Diameter: 1.45 in./ 36.83 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Raskasss Pot.
A Peterson 306 Oom Paul Restoration

August 29th, 2024
Photographed and written by

John M. Young

Yep, it’s another Peterson. What do you expect from a guy that is also known as NebraksaPeteGeek? This pipe only had to cross the Missouri River to get here. The seller was from just east of Council Bluffs Iowa. I didn’t notice until the tracking said I could expect the pipe to arrive in two days. That’s when I looked at the seller’s location. I felt kind of dumb. Well maybe, dumber. I could have picked the pipe up on the way to visit my sister, east of Council Bluffs and finagle a free dinner out of the trip. Oh well, postal workers need posts just like dogs need head pats and I need more pipes to restore. Everybody is a winner.

The 306 was actually a shape which I did not own. The final 300 shape of the series void is no longer a void. The best part is that the pipe is a sitter and doesn’t really require a slot in a pipe rack. It can just sit in the cabinet next to the rack and look majestic and self-sufficient. This 306 bore the following stamps all immediately below the nickel collar on the left shank: Peterson (arched in the traditional script) over OF DUBLIN (also arched) over SYSTEM over STANDARD 306. The nickel ferrule dome was stamped with the expected K&P over PETERSON. Since this is a standard there were no hallmarks. Below are some photos of the 306 prior to it being worked on.

The briar was in great shape. A little bit of cake in the bowl and a smidge of lava overflowed onto the rim. The stem had seen some chomping and wore the scars. Looking at the indentations it appeared the chomper clenched on his right. Either way, those would need repairs. The whole restoration looked like it would be a relaxing endeavor.

Background

If you have been following this blog for a length of time you know I have done a few Peterson restorations in the past. If you are new here, welcome and I’ve done a few Peterson restorations in the past. I’m not going to go on and on about the history of the oldest continually operating pipe manufacturer in the world and arguably the best. I will however lead you to The Peterson Pipe book. Mark Irwin and Gary Marlburg’s book is a must read for a Pete Geek.

(Available at https://www.smokingpipes.com/accessories/books/moreinfo.cfm?product_id=471478) I am also including a couple of free sites as the book is a bit pricey,

The first site is pipedia.org’s History of Peterson by Jim Lilley (Peterson – Pipedia)

The second is the pipephil.eu site for all things logo: Peterson: historical pipes — Pipes: Logos & Markings (pipephil.eu) They also have a few other links to things like the Peterson timeline and P-lip information.

As a summary of the 306,, I am quoting the Peterson.ie site below. I figured that since this pipe is currently in production why not let the makers speak for themselves.

“About the Shape

Combining the sturdy stability of a Poker with convenient jaw-hanging balance, our flat-bottomed Oom Paul is a versatile design, able to sit stably on a desk or be easily clenched in the teeth. Its bold, muscular proportions resonate with our iconic House Style.”

“About the Series

Our flagship line, the System Standard stamp first appeared in 1945, but the entry-level design has been a staple in our catalogues since Charles Peterson secured his final patent in 1898. Designed to provide a cooler, drier smoke, each pipe features a deep reservoir within the shank to collect excess moisture; a graduated bore mouthpiece that funnels the smoke and allows moisture to collect within the reservoir; a sturdy nickel military mount, which allows the pipe to be broken down and cleaned without damage or warping; and our patented P-Lip bit, which draws the smoke upward, thus reducing tongue bite. While the P-Lip bit is the traditional choice, we also offer System Standard pipes with fishtail stems. Available here in the traditional walnut stain of the Smooth finish.”

“About the Range

In 1890, after 15 years of handling and repairing pipes while working for the Kapps, Charles Peterson secured a patent in his own name, titled “A certain new and useful improvement in Tobacco-Pipes,” which introduced a unique system comprised of a higher draft hole and a moisture reservoir bored into the shank and transition of a briar pipe. Over the next eight years, Charles continued to refine his System, applying for and securing patents for a graduated bore mouthpiece (1891), and a unique button design known today as the P-Lip (1894-1898). Designed to wick moisture away from the smoke, reduce tongue bite, and increase the longevity of the pipe, Peterson’s complete System patent sparked a tradition of innovation, one we continue to uphold to this day. The System Pipe is the invisible source behind our unique House Style: our pipes’ muscular shanks and transitions, tubular profile, and generous bends. Our overall shaping style has a distinctly antique form because it has remained largely unchanged for over 120 years.

In our System range, you’ll find a variety of shapes in myriad finishes, each featuring Charles Peterson’s groundbreaking improvements in the realm of tobacco pipes. Whether you’re looking for your first pipe or to enhance a robust collection, here you’ll find numerous options to suit any taste, all backed by our legacy of craftsmanship.”

(https://www.peterson.ie/pipes/system//system-standard-smooth//moreinfo.cfm/moreinfo.cfm?pd_product_Id=174)

Now, I would never think to tell Peterson how to do their business nor how to engage in marketing but the above blurb “About The Shape” is lacking a certain bit which I find necessary. According to Irwin and Marlberg, “System shapes 304/20FB De Luxe and 306/11FB created by Paddy Larrigan and introduced in 1992” (Irwin, Mark and Malmberg, Gary (2018). The Peterson Pipe The Story of Kapp & Peterson, First edition, second printing 2021. Briar Books Press, Canada. p215). Paddy Larrigan was a third generation Peterson factory worker who was also responsible for the Dunmore line of pipes. His footprint in the history of Peterson should be glossed over. For more information on the Peterson Dunmore line check out my last Dunmore blog: https://wordpress.com/post/scimansays1787.com/6410. That means that this pipe’s origin story could have begun as early as 1992. The Standard line of pipes are difficult to date as they do not have any defining characteristics like hallmarks of silver mounted pipes. I did check the current stampings to see if they offered any notable changes and they appear the same today as this pipe’s stamps.

(https://www.peterson.ie/pipes/system//system-standard-smooth//moreinfo.cfm/moreinfo.cfm?pd_product_Id=174). The only notable difference is that the current production pipes come with an acrylic stem and this 306 has a vulcanite stem. The acrylic stem is a very recent change which occurred in the past year or two.

The Restoration

In typical “me” fashion I began with a laundered denim piece. I cannot use the term clean as the stains from previous restorations are taking a toll on that term.

The reaming crew was called forth.

The PipNet with the #2 blades did most of the work clearing the cake from the tobacco chamber. Further scraping was done with both the Smokingpipes Low Country reaming knife and the General triangular scraper. The interior of the chamber was then sanded with 220 sandpaper wrapped around a wood dowel.

The interior of the tobacco chamber had some charring and heat damage. This was scraped and sanded as smooth as possible without drastically changing the interior shape. The damage was not severe nor very deep. I thought the best remediation would be a bowl coating and the end of the restoration.

The stem was next on the schedule. I place it into a fresh solution of Oxiclean and water. And allowed it to soak for 2 hours.

I returned attention to the stummel and took it to the sink for a scrubbing with undiluted Murphy Oil Soap and a nylon scrub brush. The soap was rinsed with warm water and the stummel was dried with a cotton hand towel.

Back at the workbench the stummel looked more clean but there remained some areas with more “shine” than others. I wiped the stummel with a make-up pad dipped in 95% ethyl alcohol. This worked at removing the shine and left the stummel looking more like flat unfinished briar.

The stamps were covered with painters tape to protect them from the upcoming sanding.

The shank and reservoir were then cleaned out with many cotton swabs, folded bristle pipe cleaners, a shank british and scrapings with a dental scraper. The Peterson System does work very well but when neglected it is far from an easy thing to clean.

The stummel was then sanded with a series of sanding sponges with grits of 320-3500. Between each sponge the stummel was wiped with a make-up pad wetted with 95% ethyl alcohol.

The stem was removed from the Oxiclean solution and scrubbed with a couple of Soft Scrub cleanser treated make-up pads. A good deal of oxidized material came off but not as much as I was expecting.

The airway was cleaned with cotton swabs and bristle pipe cleaners dipped in ethyl alcohol. I could still see brown oxidized vulcanite on the stem and decided to give it a dip in the Before and After Extra Strength Deoxidizer. I inserted a pipe cleaner into the P-lip to act as a hanger in the Deoxidizer.

Below, the stem entered the Deoxidizer and was left overnight.

The following morning I removed the stem and allowed it to drip excess solution back into the jar.

The stummel had been sanded. Now it was time for the micro-mesh pads. I micro-meshed the stummel with the 4000-12000 pads. Again between each pad I wiped the stummel with a make-up moistened with ethyl alcohol.

The stummel then received a coating of Before and After Restoration Balm and was allowed to sit for as long as it took for the stem repair, sanding and micro-meshing.

Back to the drip dried stem. I used a coarse shop rag to wipe/scrub the remaining Deoxidizer from the stem. The air way had 2 pipe cleaners run through it to remove the solution.

At last the stem was looking brilliantly black. A bit pitted but the pits were black too.

I again used Soft Scrub cleanser on make-up pads on the stem. Much less oxidized rubber came off. The inside of the tenon and airway were again cleaned making sure that any remaining Deoxidizer was removed.

I sanded the Chomped areas with a 600 grit sanding sponge to ensure fresh vulcanite to work with. By “work with”, I mean to fill with black cyanoacrylate (CA, super glue). Below you can see the button top and bottom areas to repair.

The CA I was using has carbon and rubber in the formula making the fills more vulcanite-like. In other words, rubberizing the CA rather than the more hard and brittle black CA I used last winter. Small dabs of CA were placed onto the indentations.

The wet CA was then spritzed with a CA drying accelerator. This cures the CA in seconds as the accelerator evaporates.

The cured CA was then filed level with the surrounding vulcanite. The dark spots in the photo below indicate areas where additional CA needs to accumulate. I use several small applications rather than one large one.

The same for the bottom side of the stem.

Eventually with additional applications and filings the stem was sanded smooth.

With the fills completed the whole stem was sanded with the series of sanding sponges 400-3500. Between each sponge I applied a fingertip of mineral oil to the stem, rubbed it in and wiped the stem with a dry paper towel.

After the sanding the stem was micro-meshed with the 4000-12000 pads. Between each pad I applied a small drop of Obsidian Oil to the stem, rubbed it in and wiped with a paper towel.

The stem was polished using Before and After Fine Polish rubbed with a soft cotton cloth.

The Fine Polish was followed by the Before and After Extra Fine Polish with the same cloth.

The stummel was wiped of the Restoration Balm with an inside out athletic sock.

The pipe was then taken to the buffer for several coats of carnauba wax. This is where my forgetfulness comes to light. I photographed the “finished” pipe at this time. Upon completing the photo shoot, I realized that I still needed to coat the bowl. Darn old people… I was out of pure maple syrup but I did have a jar of German organic honey, a gift from a Europe traveling niece. I lightly coated the inside of the bowl with honey. I then plugged the draft hole with a pipe cleaner. I used half a capsule of carbon powder poured into the bowl, covered the rim with my hand and shook the stummel for several seconds. I ended up with a very nice circle of carbon powder on the thick part of my thumb and a well coated tobacco chamber. That is the last photo in the “finished” section below.

That is it, the relaxing restoration of a Peterson System Standard 306. I am very pleased with how well this Pete looks. At least on the outside. As with any damaged interior I will have to smoke it and monitor it closely. I can say that the inaugural smoke was with a lightly packed Five Brothers shag cut Burley. I didn’t want to scrape any of the coating off so a very soft cut tobacco was used. Everything went as planned, the honey baked in nicely with the carbon powder and it appears to be on its way to a solid carbon coating. Back to the restoration. The vulcanite was rid of the oxidation and it looks great. The briar with its bird’s eyes on the left and flame grain on the right are beautiful. I am sure this pipe will continue to be used many times while contemplating my next restoration. The dimensions of this Peterson System Standard 306 are:
- Length: 6.63 in./ 168.28 mm.
- Weight: 2.08 oz./ 59.20 g.
- Bowl Height: 1.91 in./ 48.51 mm.
- Chamber Depth: 1.61 in./ 40.89 mm.
- Chamber Diameter: 0.77 in./ 19.56 mm.
- Outside Diameter: 1.46 in./ 37.08 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Peterson System Standard 306.
A Peterson Meerschaum 120 Dublin Restoration

August 27th, 2024
Photographed and written by

John M. Young

Back in the 1990s I worked with a fellow teacher and Nebraska Air Guard F4 pilot who often said, “Better lucky than good, any day.” That phrase has stuck with me over the years and applies to so very many daily occurrences. The acquisition of this pipe for instance. It was part of a lot of 12 pipes. The other 12 were nothing to be too excited about; Yello-Boles, Dr Grabows, a split seam leather Longchamp, etc… and what appeared to be a Peterson Meerschaum hiding in the background ashamed at it’s lot in life. The photos of the lot were as usual, less than perfect yet, I knew what I thought I was seeing. I was sure that someone else would see the same thing and the lot would sell quickly. It didn’t. The auction closed with no sale and was relisted. I cannot remember how many times this relisting occurred. I finally couldn’t take the thought of a Peterson meerschaum going unloved and messaged the seller with an offer. The auction was not set as a “Make Best Offer” but I figured it was worth a shot. The seller messaged me back saying that he reduced the price to my offer. Well, that was easy.

Needless to say, after a few days of waiting the package arrived here in the wilds of southeast Nebraska. The anticipation was palpable as I tore through the packaging. I eventually unwrapped a P-lip stem with the unmistakable P stamped clearly. I knew it! Next the stummel emerged from it’s protective tissue paper. The seller knew how to package and ship pipes and not just for dramatic effect. The stem and stummel were reunited and I saw my latest prize. As typical, the only stamp was the Peterson stem logo but the shape was unmistakable a 120 Dublin. Below are some photos of the pipe prior to doing any work on it.

Background

Earlier this year I restored a Peterson meerschaum 406 Prince. I will use a good deal of the “Background” from that blog here again:

I included a few links concerning the history of Peterson pipes. I will include those here also. “For a great history Mark Irwin and Gary Marlburg’s book is a must read for a Pete Geek.

(Available at https://www.smokingpipes.com/accessories/books/moreinfo.cfm?product_id=471478) Given the price is a bit high but worth every penny for a Peterson aficionado.

Irwin, Mark and Malmberg, Gary (2018). The Peterson Pipe The Story of Kapp & Peterson, First edition, second printing 2021. Briar Books Press, Canada.

The next site is pipedia.org’s History of Peterson by Jim Lilley (Peterson – Pipedia)

Lastly the pipephil.eu site for all things logo: Peterson: historical pipes — Pipes: Logos & Markings (pipephil.eu) They also have a few other links to things like the Peterson timeline and P-lip information.”

For the history of Peterson Meerschaums I will mainly be citing Irwin and Marlberg’s The Peterson Pipe book. Peterson has a long history of meerschaum pipe making dating back to the 1870s (Irwin, 2018 p. 15). At the time when Charles Peterson began working for the Kapp brothers in Dublin, meerschaum was the old traditional material while briar was a new innovation destined to become more popular in the next century. It was with briar that Charles Peterson created his original patents for the reservoir in 1890 and for the graduated-bore mouthpiece with what we call the “Patent-Lip” (P-Lip) today, in 1894. 1893 was the year that Charles Peterson and Henry Kapp bought out the shares of Christian Kapp of the Family business, which the brothers had run together. “Christian was evidently not happy with this arrangement and disliked Dublin. He trained to become a doctor, and on 12 June 1893 he sold his share of the business to his brother and Charles Peterson” (Irwin, 2018 p. 48). The Kapp & Peterson company was born and the Peterson System has continued for over 130 years.

Now obviously the lovely Peterson meerschaum pipe in hand is not something made at the turn of the century. According to Irwin and Malmberg, “ In 1968, Peterson returned to making block-meerschaum pipes after forty years. They had made block meerschaums in all Patent Systems and many Classic Range shapes from 1896 until about 1929. The scarcity and rising cost of amber, fragility of meerschaum and popularity of briar all contributed to the end of meerschaum production.” (Irwin, 2018 p. 158). The authors go on to state that, “These Republic-era meerschaums were first made in partnership with Manxman Pipes, Ltd., on the Isle of Man, a company Peterson bought outright in the early 1970’s (Irwin, 2018 p. 158).

I am not quite sure how the purchase of Manxman pipes worked. Manxman was an apparent subsidiary of Laxey Pipes Ltd. According to pipedia.org:

“Laxey Pipes Ltd. resided in a historical 19th century four-storey Man stone building at The Quay, Old Laxey, Isle of Man, which thankfully has been preserved.

The company specialised in the production of meerschaum pipes using the Meerschaum mined by the Tanganyika Meerschaum Corporation in the Amboseli basin in Tanganyika (since 1964 part of the United Republic of Tanzania).

Please note: you may often find names like “Manx Pipes Ltd.”, “Man Pipe Co.” and others more, but there is no indication of another Isle of Man pipe producer other than Laxey Pipe Ltd. at any time!

Laxey Pipes Ltd. marketed own brands like “Manxpipe”, “Manxman”, “Manxland” e.c. Names like “John Bull”, “White Knight” (unwaxed), “Domino” (black, or lined) indicated some shapes / colours of Laxey’s own series. The stems either showed the astronomical sign for “male” or “man” (circle + arrow), or the crest of the Isle of Man, the 3-legged X in a circle. Manxpipes and Laxey’s other brands were available through pipe retailers in general, but also were sold (mainly) to tourists through their own shop in Laxey.

Furthermore Laxey Pipes Ltd. manufactured the meer bowls for Peterson, Barling, Nørding and others from the later 1960’s until 2001. Man Pipe e.g. was a brand distibuted by Comoy’s. The bowls usually showed no nomenclature indicating the orderer. “Genuine Block Meerschaum” was engraved frequently. Often, just the stems were different, while bowls were the same.

Supply of meerschaum from East Africa run out (Kenya / Tanzania exhausted, Somalia inaccessible), and thus the last Laxey meers were supplied to trade in May, 2001. Laxey Pipes Ltd. tried to survive continuing with briar pipes – mainly in the Danish style -, but to no success. It closed down business in July, 2002.”

(Laxey Pipes Ltd. – Pipedia)

As for the age of this 120 Dublin, the first documented 120 shape I found in The Peterson Pipe book was on the 1947 shape chart (Irwin, 2018 pp. 156-157). During the Free State Era ( 1922-1937 the Dublin looking shape had an R413 number. The Patent Pipes from 1890-1921 had a Dublin-esque shape named the “Kaffir” and did not have shape numbers (Irwin, 2018 p. 122, 124).

In the “A New Leaf” meerschaum brochure from 1968 there appear photos of the Peterson meerschaums offered (Irwin, 2018 p. 105). The 120 shape is represented however the stem/shank joint is very flush and smooth with a continuous taper. This 120 has a rounded shank end at the stem shank joint. The 1975 catalog photos show meerschaum pipes with stem/shank joints like this pipe (Irwin, 2018 p. 164, 166). This leads me to believe that this Peterson Meerschaum was made in the mid1970s-early 1980s.

The Restoration

Like I usually do, I began with a clean denim piece to work on.

My old Oxiclean solution was getting discolored and was not smelling very good so a new solution was made. 1 ½ tablespoons of Oxiclean powder in about 500 ml of tap water.

The stem of the Peterson was placed in the solution for a soak in the oxy.

Reaming with a reaming tool like the PipNet is not recommended for meerschaum due to it’s brittle nature and the torque generated with a tool like the PipNet would probably not be a good thing. Instead I used the Smokingpipes Low Country reaming knife and the General triangular scraper. The tip of the General had been ground from the original sharp point to a more rounded tip with a grinding wheel. A wood dowel wrapped in 220 sandpaper joined in.

The scraping did not produce a great deal of removed cake but it did clear the tobacco chamber.

When cleaning the rim I noticed what appeared to be filled cracks. I saw no evidence that these cracks joined together and actually represented a large piece of the pipe that had been broken off and later repaired. Though looking at the outer stummel surface the finish is smoothed (without rustication) between the two cracks. The area between the crack also looked thinner than the rest of the stummel. I think this was evidence of a repair by a previous owner or an attempt by the factory to salvage a flawed stummel. Either way the stummel looked and felt structurally sound.

Scraping the tobacco chamber was difficult as the cake was very hard and held firmly to the walls of the chamber. Sanding was slow and exposed fresh meerschaum at the rim of the chamber.

After the chamber was sanded I scrubbed the stummel with warm water and a medium toothbrush. The traditional Murphy Oil Soap was not used, only warm water. The water and toothbrush did appear to remove some of the accumulated grime making the stummel look a bit more clean than previously.

To unify the staining of the pipe’s rim, I used furniture touch-up stain markers.

I started with black around the rim.

I then used the mahogany immediately below the black. Sorry about the blurriness of the photo.

After the stain had dried a few minutes I used a make-up pad wetted with 95% ethyl alcohol to blend the two lines of stain together. Below you can see the results of my blending.

The stem was removed from the oxi bath after 2 hours and was wiped vigorously with a dry cotton make-up pad. A good deal of oxidized vulcanite was removed.

I cleaned the shank airway with folded over bristle pipe cleaners, a nylon shank brush and cotton swabs dipped in 95% ethyl alcohol.

The stem was then scrubbed with Soft Scrub cleanser applied to make-up pads. After scrubbing I applied a layer of mineral oil to the stem.

The airway of the stem was cleaned with bristle pipe cleaners dipped in 95% ethyl alcohol.

The pipe sat neglected for a whole day due to the incredibly busy schedule of a retired slacker, I mean teacher. When I returned to work on the stem I wiped the excess mineral oil and lightly sanded with the 320 sanding sponge.

There were a few deep dents in the stem that would require filling with black cyanoacrylate (CA, super glue). Small drops of CA were placed onto each of the dents.

The CA was then spritzed with a CA drying accelerator. This allows the CA to cure almost instantly.

The cured CA was then lightly filed with a small flat file. This removes the top of the CA fill, getting it smooth with the surrounding vulcanite.

The new fill was then sanded with 320 and 400 grit sanding sponges. The logo was covered with a piece of painters tape to protect the logo from further sanding. The stem was then sanded with a series of sanding sponges from 600-3500. Between each sponge the stem was rubbed with a dab of mineral oil by fingertip and wiped with a dry paper towel.

The flaws on the surface of the rim were filled with a different black CA. The product I use for the stem is “rubberized”. I wanted a hader CA fill for the rim so I used a non-rubberized black CA. I placed a drop of the black CA on the bottom of an upside down medicine cup. I dabbed a fly tying bodkin into the drop to get some CA onto the bodkin then applied it to the flaws. This allowed me to have precise placement of the CA limiting the sanding of excess CA fill.

I allowed the CA to cure on its own without any accelerator. This was a slow process with a good deal of waiting between applications. Once cured, I very lightly sanded the rim with a 400 and 600 sanding sponge to remove the excess CA.

Several applications and sandings later I was pleased with the result. You can see that the sanding was very light leaving most of the previously dyed rim black or, mostly so.

The rim was then re-dyed with the black stain touch-up marker. And allowed to dry.

The finished rim has imperfections which I purposely left. I thought that a pristine smooth finish would look out of place with the rustication of the stummel.

Next I cleaned the logo of any Obsidian Oil with a cotton swab dipped in 95% ethyl alcohol.

Using white acrylic model paint and a fine detail paint brush I applied white paint to the logo. This acrylic paint is water based and dries quickly.

The 4000 grit micro-mesh dam was used to remove the excess white paint.

I worked the stem with micro-mesh pads 4000-12000. Between each pad I applied a small drop of Obsidian Oil, rubbed it onto the stem and wiped with a dry paper towel.

Before and After Fine Polish was used with a soft cotton cloth on the stem to increase the level of polish.

The Fine Polish was followed with Before and After Extra Fine Polish applied and hand buffed with the same soft cotton cloth.

To finish the stummel I needed to prepare for a beeswax coating. I gathered the heat gun, canning jar with beeswax & brush, a catch tin for wax drips and a shallow pan with water. The pan and water help to heat/melt the wax and keep it melted while I work.

The canning jar with beeswax was placed into the water in the pad and the stove lit. The boiling water will melt the wax.

WHile I was waiting for the wax to liquify, I waxed the Peterson stem at the buffer with carnauba wax.

The hot water bath melted the wax. I heated the stummel with the heat gut. I have to admit I was a bit worried about heating the mortise and tenon too much.

With the stummel hot and the beeswax melted I started painting the liquid wax onto the stummel. I painted the top 1.3 and the entirety of the shank. As I painted the accumulating wax was cooling making a lumpy looking mess.

The heat gun was again turned on and the stummel was rotated in all directions in the flow of hot air. The wax remelted and flowed over the surface of the stummel. I herded the wax around with the paint brush to make sure that everything was getting it’s fair share of melted wax. The excess wax drips were accumulating in the catch tin.

With every part of the stummel well coated with hot liquid wax I used a paper towel to absorb the remaining excess wax from the stummel.

The pipe was hot to the touch so I laced it onto the workbench to cool.

There you have it, the restoration of a Peterson Meerschaum 120 Dublin. This old girl turned out pretty well. I still wonder what happened to the Dublin Darling from the Isle of Man regarding the cracks in the bowl. I believe that the whole rear of the bowl was chipped out at some time and repaired with a pretty darn good glue job. The crack seems can kind of be made out in the photo below of the back/shank side of the pipe. Whatever happened she should continue being a grand little pipe for many years. The fresh beeswax looks good and the stem polished up very well. The dimensions of this 120 Dublin are:
- Length: 6.00 in./ 152.40 mm.
- Weight: 1.28 oz./ 36.50 g.
- Bowl Height: 1.71 in./ 43.43 mm.
- Chamber Depth: 1.47 in./ 37.34 mm.
- Chamber Diameter: 0.74 in./ 18.80 mm.
- Outside Diameter: 1.33 in./ 33.53 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Peterson Meerschaum 120 Dublin.
A Needham Restoration

August 22nd, 2024
Photographed and written by

John M. Young

This is a pipe I read about in 2023 and have been searching the auctions for since. One showed up in Italy a few months ago and the price was just too steep for my tastes. Finally this one showed up with an estate lot. I didn’t really want any of the other pipes in the lot but they were a package deal. I watched the auction run to the allotted time and still would not pay the asking minimum bid. The seller relisted the lot and my watch began anew. Again no one met the minimum asking price. The item was relisted a third time, with a “Make Best Offer” option. “Okay, now we’re talking”, I thought. I waited a few days then sent an offer with a note that I was only really interested in the Needham. The offer was accepted and I received the lot a few days later.

I was ecstatic when I saw the Needham in the flesh. The condition was much better than I expected or than the photos showed. Actually, a couple of the other pipes were also quite interesting and will most likely be seen in the future. The Needham looked to have only been smoked a few times, if that. The bottom of the tobacco chamber appeared unfired. The stamps on the base of the pipe were clear and well imprinted and read, NEEDHAM over IMPORTED BRIAR over PAT’D. There is no stem logo. The only other distinguishing feature is the red anodized aluminum screw at the front of the stummel base. Below are some photos of the pipe as it appeared upon arrival.

Background

The advertisement which originally sparked my interest in the Needham pipe is the below from the November issue of Pipe Lovers magazine 1946, page 365.

(https://archive.org/details/pipe-lovers-magazine-1946-7/Pipe%20Lovers%20Magazine%201946-11/page/n3/mode/2up)

Now, you would think with an idea this great and a shape this cool and a pipe market that was smoking (pun intended) this would have been a great success with tomes written about and chronicling this wondrous development of human ingenuity. Umm, no. Here is what Pipedia.org has to say about Needham pipes:

(American Pipe Brands & Makers N – Q – Pipedia)

Perhaps pipephil.eu has access to the hoards of documentation for the brand?

Bah, fortunately, dear reader I am not easily dissuaded by failure. I did come across a few interesting reads regarding the original Needham patent and the flush of smoking pipe innovations from the late 1800s-mid1900s. First lets take a look at the original Needham patent submitted September 30, 1942.

(https://patentimages.storage.googleapis.com/c6/1e/a1/c5a59e50ecc2e6/US2349296.pdf)

This shows almost exactly the pipe in hand.

The second article shows a condensed form of the previous long description:

The final is an essay by Ben Rapaport, with my favorite quote where he is describing fundamental changes to smoking pipes over the past 100 years, “So what’s left? Asked and answered: all the quirky, kitschy, zany-looking concoctions, contraptions, and gimmicks, the Rube Goldbergian attempts at either changing the pipe’s outer appearance or reengineering the interior’s performance. Quite a few offered to the smoking public in the early to mid-20th century were, literally and figuratively, pipe bombs—not the homemade, improvised explosive devices—pipes that never got much consumer traction; their designs were of questionable functionality and of dubious benefits. A few were advertised as delivering a healthier smoke. Others were so butt-ugly that no self-respecting pipe smoker would have been seen puffing one of these in public.” (https://pipedia.org/images/e/e9/Rapaport-Pipe_Bombs.pdf) Ben Rapaport does have a nice description of the Needham and it’s intended improvements:

(https://pipedia.org/images/e/e9/Rapaport-Pipe_Bombs.pdf)

In examining the stummel and measuring drilling depths, I came up with the following diagram (measurements and their corresponding representations are approximate and not to scale):

Do I think that this system would work? Not really. The theory is reasonable but the dimensions don’t seem appropriate. If the condensing chamber were to be tripled in length and the moisture drain would be drilled larger in diameter, then maybe. It would then be a pipe more like a horizontal Cavelier. As built, I think that the small amount of moisture condensed would foul the moisture drain and not accumulate in the Moisture chamber.

(https://pipedia.org/wiki/Cavalier)

Needham pipe advertisements appear in the 1946 November and December issues of Pipe Smokers magazine. The patent for the Needham was applied for in 1942 and issued in 1944. I cannot find anything about the Needham pipe factory or what became of it. I think it is safe to say that this pipe was made around 1946.

The Restoration

As usual the restoration began with a clean piece of denim to work on.

The reaming tools, though hardly necessary, were gathered.

I used the PipNet with the #2 blades to ream the tobacco chamber. I can’t really call the smoking residue that was present cake. It was more like a communion wafer than a cake. I scraped the chamber clean and sanded with the 320 sandpaper wrapped around a wood dowel.

Not surprisingly, the walls of the Neeham were nearly pristine.

Next the shank and the lower moisture chamber (as it was called in the advertisement) were cleaned using cotton swabs and bristle pipe cleaners both dipped in 95% ethyl alcohol.

The below photo shows the two holes drilled in the stummel. The top hole is the draft hole while the bottom is supposedly the hole where the condensation will drain into the moisture chamber.

Here I have run a pipe cleaner through the lower hole and out the front of the moisture chamber.

Here a pipe cleaner is run through the upper hole and into the tobacco chamber.

After the shank was cleaned I turned my attention to the stem.

With the inside clean, I sanded the surface with a 400 grit sanding sponge and prepared the stem for a dip into the Before and After Extra Strength Deoxidizer or, as I like to call it deox.

Into the deox with you.

The pipe cleaner inserted into the tenon acts as a hanger for the stem.

I left the stem in deox for about three hours, it was two episodes of rewatching The Umbrella Academy while working on the stummel and a lunch break. The stummel was taken to the sink for a scrubbing with a nylon scrub brush and undiluted Murphy Oil Soap. The soap was rinsed with warm water and the stummel dried with a cotton dish towel.

Upon returning to the workbench the stummel was wiped with 95% ethyl alcohol on a make-up pad. There appeared to be some residual finish on the briar.

The scrub and wipe did reveal several pits which would require filling with cyanoacrylate (CA, super glue) and briar dust.

There remained some kind of finish on the wood. I used acetone on a make-up pad and that seemed to be what was needed to remove the stubborn clear finish.

I sanded the stummel with a 400 grit sanding sponge. At this time I applied thin coats of CA to the grooves seen earlier. The sanding dust provided the briar dust needed to combine with the CA and fill the depressions. The shallow grooves only took one application of the CA while the deeper groove required 3 and subsequent sanding to fill it. The series of sanding sponges then continued from 600 through the 3500 grit. Between each sponge I wiped the stummel with a make-up pad moistened with ethyl alcohol.

After lunch the stem was taken from the deox and allowed to drip dry using the pipe cleaner hanger pinched into a bottle lid.

When finished dripping the stem was vigorously rubbed with a coarse shop rag to remove the deox loosened oxidation. This can be seen as the discoloring on the shop rag, below. The stem ‘s surface looked pitted and rough.

I scrubbed the stem with several make-up pads sprinkled with Soft Scrub cleanser to remove more of the surface oxidation. The stem was now black and received a coating of mineral oil before the next step.

Next came the sanding sponges, 320-1000 grit. I first wrapped the shank with painters tape to protect it. I needed to reattach the stem to the stummel to ease holding the stem.Between each sponge I applied mineral oil, rubbed it in with my fingers and wiped the stem with a clean dry paper towel.

The pitting was sanded away and revealed a much more uniform black vulcanite. This was further sanded with the 1500-3500 sanding sponges again with the mineral oil rub and wipe between each sponge.

The tape was removed and the stummel and sem were worked with the 4000-12000 micro-mesh pads. The stummel was again wiped with alcohol on a make-up pad between micro-mesh pads. The stem now received a small drop of Obsidian Oil rubbed in and wiped with a paper towel.

Before and After Restoration Balm was then applied to both the stem and stummel and allowed to sit for an episode of The Umbrella Academy, about 45 minutes.

The Restoration Balm was wiped off using an inside out athletic sock and energetic hand buffing to clear the balm from the carvings.

The pipe looked amazing. I then took it to the buffer for several coats of carnauba wax. The wax was worked into and with the scratch-like rustications. This took considerably longer than a typical wax and buff.

I was very pleased with the restoration of this Needham Not just because I finally found one to restore, although that was pretty cool in itself. The briar grain is pretty and I wonder why the rustication was used. I have not seen any versions of a Needham pipe with a smooth finish. The vulcanite cleaned-up well and looks great. I have yet to smoke the Needham and experience the effectiveness of this system. I do have my doubts about the need for the extra drillings and chamber. Who knows, I will be completely happy with either result – a nice relaxing smoke with a neutral tobacco. I’m thinking Peterso’s Early Morning Pipe blend. If you want to know my impressions of the system let me know in the comments. Also if you have any information about the Needham Pipe Company or Edward F. Needham, I’d love to read that as well. The dimensions of this Needham are:
- Length: 5.67 in./ 144.02 mm.
- Weight: 1.47 oz./ 41.80 g.
- Bowl Height: 1.74 in./ 44.20 mm.
- Chamber Depth: 1.29 in./ 32.77 mm.
- Chamber Diameter: 0.85 in./ 21.59 mm.
- Outside Diameter: 1.38 in./ 35.05 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Needham.
A Denicotea 0823 Bent Billiard Restoration

August 20th, 2024
Photographed and written by

John M. Young

Here we have another Denicotea. I know what you are thinking, “Young, you chose that one so you wouldn’t have to do a bunch of research for the background section”. Wow, you guys are a tough crowd who are a bit cynical of my motives. True there is little information about Denicotea pipes but that is hardly the reasoning behind restoring this curvaceous cutie. I like a black sandblast and am drawn to the elegant curves of this old pipe. Besides, if I restore a couple of Denicoteas per year it makes my German friend Sascha Mertens happy.

This bent beauty came as part of an estate lot from Norman Park, Georgia earlier this summer. It was not the object of desire from the lot. The real target was a 2020 Dr Grabow Collector but this pipe trumped the Collector in the queue due to its intriguing shape and my desire to see how the Denicotea P-lip compared to that of my beloved Peterson pipes. The pipe has a full bend with the robust Denicotea shank/stem fitting for a pipe which takes a 9mm filter. The stampings are “denicotea” over “jolle” with a 0823 shape number to their right all on the bottom of the shank. The stem has a D within a circle. The stamps are well formed and sharp while the logo is much lighter. Below are some photos of the Denicotea as it appeared on arrival.

The black finish showered overall signs of wear with numerous spots of briar showing through the black. The stem surface was oxidized but free of tooth chatter or dents. The bowl needed a reaming and the rim a good scrubbing but all told this looked to be a straightforward restoration.

Background

As alluded to in the beginning, Denicotea pipes are rather lacking in the documentation of their carving, manufacture and business. As stated in my previous blog regarding a Deicotea billiard (linked), ““Willy Heineberg founded the company Denicotea in 1932 and began manufacturing and selling smoking accessories such as filters, filter inserts, cigarette holders and pipes.^[1] The company headquarters was initially in Cologne, but was relocated to Bergisch Gladbach after the Second World War.^[2]

Denicotea is actually the name of a silica gel filter, cigarette holders and care products for pipes and cigarette holders.

I still find it a bit confusing as Denicotea seems to be a company^[3] and a brand as well which is operated by COMPOSING-STUDIO GmbH^[4].” (Denicotea – Pipedia).

I cannot find anything pertaining to the shape numbers of Denicotea pipes yet in the photos that I have seen online there are almost always shape numbers stamped on the pipes. The company itself is registered as a German firm as an be seen from the pipephil.eu entry for Denicotea:

(Den-Dh — Pipes : Logos & Markings (pipephil.eu)). Anyone with any experience with German products knows that the Germans are exceptional and meticulous craftsmen. This can also be seen in their business and record keeping. Below is just a clip of the German registration of Denicotea:

(DPMAregister | Marken – Registerauskunft)(translated by Microsoft Edge). I show this because I think it is funny. According to the pipedi.org site Aldo Mollini is, “is a fictional name. The brand Aldo Morelli has been registered for Denicotea on February 26th, 1992.”(Denicotea – Pipedia). I find the fact that a fictional Italian appears to be the signatory for a German company. Yeah, I know it is just a brand and not the executive officer but it makes me think of Hamlet, “Something is rotten in the state of Denmark.” Or in this case northern Germany.

In conclusion we have a Denicotea Jolle made somewhere and at sometime by a German company with brands named after fictional characters.

The Restoration

Fortunately the restoration was more clear than that of the background. I began with a cleaned denim piece for the work surface.

The reaming tools were assembled. The cake was not very thick and little overflow lava was noticed.

The cake was hard and dry but the PipNet with the #2 blades made short work of it. The interior of the tobacco chamber was scraped with the two reaming knives then was sanded with the 320 sandpaper wrapped around a wood dowel. There was no indication of any heat damage to the briar within the chamber.

Next came the cleaning of the shank airway. This was a repetitive process of scrubbing the airway with an alcohol dipped nylon shank brush, followed by alcohol dipped bristle pipe cleaners and cotton swabs. Eventually the pipe cleaners and swabs emerged nearly the same color as when they entered.

The stem was cleaned in a similar fashion but without the use of the shank brush.

Once cleaned inside the stem was submerged in an OxyClean solution and set aside to soak for an hour or so.

The stummel was taken to the sink for a scrub. Here, undiluted Murphy Oil Soap was used with a nylon scrub brush. The soap was rinsed with warm water and the stummel dried with a cotton dish towel.

Returning to the workbench the stummel was wiped with a cotton make-up pad wetted with 95% ethyl alcohol. Some color came off though this was mainly from the rim.

The scrubbing and alcohol wipe revealed the numerous scuff marks which had worn away the black stain from the briar.

I thought that a fresh dye application of black Fiebing’s Leather Dye would restore the overall color of the stummel. The Fiebing’s dye gear was gathered and included the dye, a folded pipe cleaner (as an applicator) , a duct tape wrapped fishing bobber (most folks use a wine bottle cork), and lighter.

Using the fishing bobber as a handle and to keep dye out of the tobacco chamber, I applied a couple of coats of the Fiebing’s Dye to the stummel. After each coat I flamed the wet dye burning off the alcohol solvent and fixing the dye to the briar. The excess dye was wiped from the stummel with a paper towel. Back at the workbench the stummel looked much better with a fresh coat of black dye.

The stem was retrieved from the OxyClean and wiped with a dry make-up pad. Some oxidation had been softened and lifted by this.

The stem was then scrubbed with Soft Scrub cleanser applied to make-up pads. The first pads became darkly covered with brown oxidized rubber. I did not want to get too aggressive with scrubbing the shank-ward end of the stem as the logo was not particularly deep and I feared the abrasive cleanser would remove it.

The stem was reattached to the stummel for easier holding. The shank was then covered with painters tape to protect it from sanding.

The stem logo was also taped for its protection.

The stem was sanded with a series of sanding sponges from 400-3500 grit. Between each sponge I dipped my finger tip into mineral oil, rubbed this onto the stem and wiped it with a dry paper towel.

The stem was then worked with 4000-12000 micro-mesh pads further polishing the vulcanite. Between each pad I rubbed in a small drop of Obsidian Oil and wiped the stem with a paper towel.

The now slightly fainter logo was given a fresh Rub’nBuff gold leaf application. I did not know what the original logo looked like but I thought the gold would look appropriate with the all black pipe.

All that remained was to apply several coats of carnauba wax with the buffer.

Overall I was very pleased with the restoration of this Denicotea Jolle 0823. The draw is very open and feels like it is meant to have a filter, when I placed a Stanwell 9mm filter into the stem the pipe retained a good comfortable draw. The pattern of the blast shows a nice ring grain on the left and interesting bird’s eyes on the right. The stem polished up fairly well but does still show a tinge of oxidation around the shank. I did not want to get too aggressive with the removal and diminish the stem logo.

The dimensions of this Denicotea Jolle 0823 are:
- Length: 5.95 in./ 151.13 mm.
- Weight: 1.86 oz./ 52.90 g.
- Bowl Height: 1.80 in./ 45.72 mm.
- Chamber Depth: 1.56 in./ 39.62 mm.
- Chamber Diameter: 0.72 in./ 18.29 mm.
- Outside Diameter: 1.46 in./ 37.08 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Denicotea Jolle 0823.
A Silverking Synchromatic Billiard Restoration

August 15th, 2024

Photographed and written by

John M. Young

SilverKing a name that everyone has heard of and associates with … Umm, what? Haven’t heard of em, eh? Well neither had I but it is still a darn fine looking piece of briar. And it’s made in France, maybe. Okay, I am reaching for some enthusiasm . This lovely old billiard was one of six pipes that I won from ebay back in June of this year from Hollywood, Florida. The target of my desire was the Peterson meerschaum (2nd from the right) which was hiding amongst these pipes as seen in the photo below. I have restored all but one of the lot. As a matter of fact, the Barclay Rex was sold right after the restoration blog was published. I will add links to the restorations of the others for those who might be interested: Canted Dublin, Barclay Rex, Telford’s Canadian, Peterson meerschaum. The finished pipes look far better than their below photo.

Back to the subject at hand, this lovely Silverking billiard. The pipe was stamped with SILVERKING over SYNCHROMATIC on the left shank and ALGERIAN BRIAR over FRANCE on the right shank. The stem has a crown stamped logo and the silver band is stamped EP within a diamond and three Hallmarks (middle and stem-ward worn to illegible). Below are photos of the Silverking billiard prior to working on it.

This looked to be a straightforward restoration with no glaring difficulties. There were a few deep fills to be made to the briar, a slightly overclocked stem and the missing stinger but other than that a nice relaxing afternoon in the basement avoiding the heat of mid-summer.

Background

I would love to be able to tell a good story about the trials and tribulations of the Silverking pipe factory but alas, there is scant information concerning this maker. If you have any additional information, please feel free to leave it or links in the comments. All I could find is the following from pipephil.eu:

(Si-Siq — Pipes: Logos & Markings (pipephil.eu)). Referring to the “?” at the top right of the screenshot below, I am not sure why there is a question about the country of manufacture (COM) of this pipe as it is clearly stamped MADE IN FRANCE or in the case of my Silverking FRANCE. “Made in France” is also stated in the text above.

I looked at the “Otherline from this factory” links and they are included here:

(Big Ben — Pipes : Logos & Markings (pipephil.eu))

(Go-Gq — Pipes: Logos & Markings (pipephil.eu))

Not much to work with. A quick search on pipdedia.org resulted in the following quote,

“This is probably not a brand but rather the name of a line of an unknown french factory.

Other line from this factory: Big Ben Reputation , Gold King”(Silverking – Pipedia).

It looked like pipedia.org got their information from pipephil.eu as well.

Now we can assume a bit of information about the date of production. Algeria had been a source of briar from the mid to late 1800s and into the early 1900s. During the years of World War Two briar production was severely limited. After the war briar production returned. Algeria was a French colony and like many colonies during the mid 20th Century, experienced a wave of anticolonialism. The French attempted to squelt this anticolonialism leading to the Algerian war of independence from 1954-1962. During this time Briar production from Algeria was greatly reduced. According to the Wikipedia.com article fatalities of the conflict were, “between 400,000 and 1,500,000 Algerians,^[40]^[24]^[22] 25,600 French soldiers,^[15]^: 538 and 6,000 Europeans.” (https://en.wikipedia.org/wiki/Algerian_War).

A more complete story of the military operations is available here: https://www.armyupress.army.mil/Portals/7/military-review/Archives/English/MilitaryReview_20081031_art012.pdf

Well that about sums up all I know about this old pipe. It was made in France of Algerian Briar. Most likely between the second world war and 1954.

The Restoration

As typical this restoration began with a relatively clean denim piece as a work surface.

The reaming tools were gathered and included the Scotte Stainless Steel reamer rather than the traditional PiNet reamer due to the narrow tobacco chamber and the fact that my PiNet #1 blade suffered a catastrophic failure. The Scotte did a fine job and only required a small amount of scraping with the Smokingpipes Low Country Reaming knife and the General triangular scraper.

After the reaming the chamber was sanded with 320 sandpaper wrapped around a wood dowel. No heat damage was observed in the chamber.

The shank cleaning was done with 95% ethyl alcohol, a nylon shank brush, bristle pipe cleaners and cotton swabs.

After the shank was cleaned I turned my attention to the stem. Here the ethyl alcohol and bristle pipe cleaners were used to clean the airway of the stem.

The rim of this old French billiard had definite lava accumulations. This was softened with saliva and scraped with a sharp pocket knife.

The scraped rim looked better but would require a good scrubbing.

Seque to the scrubbing. The stummel was taken to the sink for a scrubbing with undiluted Murphy Oil Soap and a medium toothbrush. The soap was rinsed with warm water and the stummel was dried with a cotton dish towel.

Back at the workbench the stummel appeared to have most of the finish removed during the scrubbing. The briar looked dull and flat except in a few areas where some finish remained.

An 95% ethyl alcohol wetted make-up pad was used to scrub the stummel. A good deal of color came off the stummel. This indicated that wax, finish and stain were being removed.

A second alcohol wipe yielded more color.

To make sure no coatings remained a wipe with a make-up pad with acetone was used. This time only a little bit of stain was present on the pad.

All of the scrubbing and wiping allowed me to see the pits and damage to the stummel. These would require a fill of brown cyanoacrylate (CA, super glue) and briar dust.

The gouges received a small drop of CA applied with a fly tying bodkin. While the CA was still wet I scooped a small amount of briar dust with a dental scraper and placed the dust on the wet CA. This was then pressed into the wet CA in the depressions..

The briar dust causes the CA to cure almost instantly so once the dust is placed, pressing had to occur immediately. The excess dust was brushed off with a brass brush.

The new fill was filed with a flat diamond needle file to remove and smooth the fill then was sanded with a 400 grit sanding sponge.

In deeper fills this process was repeated until the fill was complete. The completed fills appear much darker than the surrounding briar. The light spots seen below are slight depressions with dry briar dust from sanding in them. A final coat of clear thin CA was applied to the dry spots and they were sanded with a dusty 400 grit sanding sponge. The dust was incorporated into the slight depression with the clear thin CA to fill the last of the low spots.

The above procedure was used to fill pits of the shank.

And the heel of the stummel.

To conceal the fills and to add contrast to the briar grain, I decided to contrast dye this stummel. Black Fiebing’s Leather Dye was chosen for this. The duct tape wrapped fishing bobber acts as a plug to keep dye out of the tobacco chamber and as a handle. The folded pipe cleaner is the applicator for the dye while the lighter provides a flame when burning off the alcohol solvent of the dye fixing it to the briar. Notice that I used painters tape to cover the stamps. This is done to keep the dye from penetrating the briar on the stamp. Were that area to become darkly dyed, extra sanding/buffing would have reduced the stamps.

Below is the black dyed stummel, still wet with Fiebing’s Leather Dye.

I wiped off the remaining damp dye with a paper towel. This also removed my painters tape stamp protectors. Here you can see that the stamped area received less dye thus reducing the amount of sanding/buffing that the stamp will be exposed to.

The blackened stummel was taken to the buffer where rouge buffing compound was used to buff away the router black dyed briar. The results looked good but I wanted the stummel to be lighter overall in color.

To further lighten the briar I lightly sanded the stummel with 320 and 400 grit sanding sponges. This removed more of the black dyed briar. When I was happy with the shade, I sanded the stummel with a series of sanding sponges 600-3500 grits and wiped the stummel with an alcohol dampened make-up pad between each sponge..

I turned my attention to the stem. The slightly over-clocked stem could have been adjusted a couple of different ways; by heating the aluminum threads until the rubber softened and then turning the aluminum slightly or to add a bead of black cyanoacrylate to the end of the stem. I chose the later as the overclocking was so slight. Here I sanded the stem from about its middle to the button with 320 and 400 grit sanding sponges.

I then used Soft Scrub cleanser on make-up pads to scrub the entire stem. The pads became very dark with oxidized stem material. I was uncertain as to the material used with this stem. Normally oxidized vulcanite yields a brown color on the make-up pad. This was nearly black. I coated the stem with mineral oil and allowed it to sit for 30 minutes. After the sitting, the stem looked black with no signs of a brown oxidized stem.

The stem was then sanded with a sequence of sanding sponges from 600-3500 grit. I did cover the stem logo with a small piece of painters tape to protect it from the sanding. Between each sponge I rubbed mineral oil onto the stem with my fingertip and wiped the stem with a paper towel.

After the sanding sponges the stem was polished with 4000-12000 micro-mesh pads. Between each pad I applied a drop of Obsidian Oil to the stem, rubbed it in with a fingertip and wiped the stem with a paper towel.

After micro-meshing the stem, I cleaned the logo area with a cotton swab dipped in alcohol to remove any oil.

I then used Silver Leaf Rub’nBuff on the logo. The silver was worked into the stamped logo, allowed to dry for a couple minutes and buffed with a paper towel to remove the excess. I know, the pipephil.eu information said that the Silverking used white on the logo but I thought that silver would look a touch more classy.

The stummel was micro-meshed in a similar fashion except without the Obsidian oil. Here I wiped the stummel with an alcohol dampened make-up pad between pads.

The stummel was given a coat of Before and After Restoration Balm and allowed to sit for 20 minutes. I failed to photo this step. After 20 minutes the Restoration Balm was wiped off with an inside out athletic sock. I failed to photo that as well. The final step was to take the pipe to the buffer for several coats of carnauba wax.

This pipe turned out very well. I really like how the contrast staining brought out the differences in the grain. It made the bird’s eyes stand out much better than I hoped it would. The stem polished up well. I still do not know exactly what the stem material is but it looks good and didn’t turn my lips black when I sampled the draw of the pipe. I do wish the stinger was intact though the draw is very nice without it. I am sure this will be a nice smoking pipe for someone who loves a long billiards. With it’s relatively tall and narrow tobacco chamber I expect it would make a fine Virginia or Virginia Perique blend pipe. The dimensions of this French beauty are:

Length: 6.34 in./ 161.04 mm.

Weight: 1.38 oz./ 39.30 g.

Bowl Height: 1.83 in./ 46.48 mm.

Chamber Depth: 1.53 in./ 38.86 mm.

Chamber Diameter: 0.69 in./ 17.53 mm.

Outside Diameter: 1.46 in./ 37.08 mm.

I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Silverking Synchromatic billiard.
A Frank Dublin Horn Stem Restoration

August 13th, 2024

Photographed and written by

John M. Young

This is something that you don’t see everyday: An original unfired early 1900s Frank Dublin pipe with a nickel plated band, horn stem and threaded bone reverse tenon. This pipe was part of an eclectic estate lot which contained a couple of old pipes in unsmoked condition. This was the first of that lot I have tackled. The stamps on this pipe read, Frank (in a cursive script) over ITALIAN BRIAR. There is no shape number. The band is stamped with three five pointed stars over 3 faux hallmarks (an anchor, a star and a walking figure with a bird-like head) over NICKEL PLATED. Judging by the horn stem with an orific style button and the bone tenon, I am guessing this pipe was made prior to 1920.

Below are some photos of the Frank Dublin prior to it receiving any work:

Okay, this is more of a clean-up than a full restoration since the pipe has never been smoked. And, yes, keeping to the original aesthetic is usually paramount to a restoration but, I am pretty sure that there is briar grain under that stain that needs to see the light of day. The finish will be removed. The stem sanded and polished and the whole thing made beautiful. All without having to clear the yuck from a shank – YAY!

Background

The name Frank refers to Sam Frank Sr. who started building a pipe empire in 1900. I will let the article for pipdia.org explain this, “In the year 1900 Sam Frank Sr. started his own business, selling pipes and other tobacco items. His original office was located at 20 W. 17th Street, NYC. He was also closely associated with the sales staff of Wm. DeMuth & Co., selling their line of pipes. It was at this time that Mr. Frank first met Ferdinand Feuerbach and formed what would be a lifelong friendship. Mr. Feuerbach started working for the DeMuth company in 1897 and by 1903 had become the production manager. In 1919, when Mr. Frank needed an experienced pipe man to run his pipe factory, located at 168 Southern Blvd., in the Bronx, he persuaded his old friend Ferdinand to join him. Mr. Feuerbach is credited with developing DeMuth’s popular Royal DeMuth and Hesson Guard Milano pipelines. In 1922, when S. M. Frank purchased the Manhattan Briar Pipe Co. the company incorporated. In 1933, the paper Medico filter was introduced along with the Medico brand line of pipes. The Medico filter is the “original” and most absorbent paper filter on the market that is recognized by pipe smokers world-wide. Filtered pipe smoking, a debatable issue among pipe smokers, reduces tars and nicotine in the smoke stream to make a “safer” smoke.” (S. M. Frank & Co. – Pipedia) (italics are mine)

As for the year that this ppe was produced, I found an article on S.M. Frank which states, “The earliest recorded location of the S. M. Frank pipe factory was 292 Ave. B in Manhattan in 1903. This was their factory until the late 1910s, when they moved to 168 Southern Blvd. in the Bronx.” (https://www.14to42.net/21street.html) The above quote from pipedia.org mentions that Frank, “In 1919, when Mr. Frank needed an experienced pipe man to run his pipe factory” (S. M. Frank & Co. – Pipedia). These two pieces of information indicate that the Frank pipe factory was established in 1903 and produced pipes through 1919 and beyond. Judging by the orific style stem of this pipe, I am assuming that it was made in the Frank factory located in the Bronx of New York City. Steve Laug, of rebornpipes.com, discusses the orific button in depth (https://rebornpipes.com/2013/05/17/whatever-happened-to-the-orific-button/). In this post he notes that pipes with orific buttons in his collection date from 1850s-1912. Personally I do not think that I have ever seen an orific button on any pipe from later than 1920. This reinforces my claim that this Frank Dublin was made prior to 1920. More specifically between 1903 and 1919.

The Restoration

As typical with my restorations, I began with a clean denim piece. No tar stains from this old girl. There would be a bit of black sanding dust though.

The annoying sticker and its old adhesive would have to go.

The sticker was scraped free and the stubborn adhesive removed with 95% ethyl alcohol on a cotton swab.

The stummel was taken to the sink for a scrubbing with Murphy Oil Soap and a medium toothbrush. The Murphy’s removed the century worth of dirt and grime and was rinsed with warm water. The stummel was dried with a cotton dish towel and returned to the workbench.

The stummel looked much better and I could see briar grain peeking through the layers of stain.

I first tried 95% ethyl alcohol on a make-up pad to free the briar.

Next, I tried acetone on a make-up pad.. The chemical solvents made advances on removing the finish and more grain was apparent.

I resorted to physical rather than chemical removal and was rewarded with a lovely contrast stained piece of briar. The stummel was sanded with a 320 grit sanding sponge, removing the outer layer of black stained wood.

Another wipe with acetone on a make-up pad removed yet more stain.

The rim was lightly topped with 400 grit sandpaper laid flat on a countertop. I did not have to sand away dents of ding, just the stained briar.

Next I started sanding the stem. I first wrapped the nickel plated band with painters tape to protect it from the sanding. I then used a series of sanding sponges from 600-3500 grits. Between each sponge I wiped the stem with a make-up pad wetted with alcohol. The stem was looking very good after the sanding.

The stummel sanding revealed an old fill at the front of the stummel. The old fill material was picked out with a fly tying bodkin. The new fill was made with brown cyanoacrylate (CA, super glue) and briar dust.

I placed a drop of brown CA into the depression then scooped up a small mound of briar dust with a dental scraper. The briar dust was placed onto the wet CA and pressed into the pit. The CA cures very quickly with the dust and allows sanding within seconds. The new fill was brushed off with a brass brush to remove the excess briar dust then the new fill was sanded with a 400 grit sanding sponge. This was a large fill and it required repeated applications of CA and briar dust.

The stamps on the shank were covered with painters tape and the band was retaped for their protection. The stummel was then sanded with the series of sanding sponges from 600-3500. Between each sponge I wiped the stummel with a make-up pad wetted with alcohol.

The protective tape was removed and the stem and stummel were micro-meshed with pads 4000-12000. Again, between each pad I wiped the stummel with a make-up pad wetted with alcohol.

The entire pipe was given a coat of Before and After Restoration Balm. The balm was allowed to soak into the stem and stummel for 20 minutes.

The Restoration Balm was wiped off with an inside out athletic sock, revealing the beautiful old briar.

To raise the shine on the stem I hand polished it using Before and After Fine Polish on a soft cotton cloth.

The Fine Polish was followed by Before and After Extra Fine Polish, again hand polished with a soft cloth.

The Frank Dublin was then taken to the buffer for several coats of carnauba wax.

This was a nice relaxing restoration which turned out wonderfully. The previous stain did a fine job of staining the briar and when sanded allowed a beautiful contrast stain. The horn stem has aged very well and was fortunately never attacked by beetles. I have to admit that the feel of a horn stem is not bad on the teeth. I think a non-orific button would make it even more comfortable. The coloring of the horn is a feature that I appreciate the most. I am sure that this pipe will find its way to its next steward who may take it into the next century.

The dimensions of this unfired darling are:

Length: 5.68 in./ 144.27 mm.

Weight: 1.13 oz./ 32.20 g.

Bowl Height: 1.85 in./ 46.99 mm.

Chamber Depth: 1.48 in./ 37.59 mm.

Chamber Diameter: 0.76 in./ 19.30 mm.

Outside Diameter: 1.30 in./ 33.02 mm.

I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Frank Dublin.
A Telford’s Canadian Restoration

August 8th, 2024

Photographed and written by

John M. Young

Decisions, decisions. That is what I was thinking before selecting this Telford’s Canadian for the next restoration. The SilverKing and the no-name billiard were looking for love but it all went to the Telford’s.

I have a few restoration blogs finished and scheduled for publication on Tuesday and Thursday mornings. I figured that I could try my hand at a restoration that might require some extra time and I didn’t want to feel rushed with a self-imposed deadline. This Telford’s has a cracked bowl and will be my second attempt at using the Charles Lemon pinning technique (I linked it so you can read the original).

I had never heard of Telford’s as a pipe maker and assumed it to be a tobacco shop which had stamped it’s name on a pipe made by a London based pipe maker. Why London? Well, the stamps on the bottom of the shank read TELFORD”S in the center on the end of the shank by the stem there was a 296, I assumed was a shape number. There was a circular MADE over IN over LONDON with the “IN” inside the circle and the “MADE and LONDON forming the circle and an E stamped on the end of the shank. Below are some photos of the Telford’s as it appeared prior to work being done.

Oh yeah, some serious work would be required to get this old girl back into the game. Obviously there was the cracked bowl to repair. There were some big fills to be made on the left heel area and the right shank. The stem was severely oxidized with some deep tooth imprints and a layer of calcium. The bowl itself was caked with carbon and the subsequent lava flow onto the rim.

Background

Normally the first place I go when researching a brand is to pipedia.org. The search for “Telford’s” met with “no results matching the query”. Strike one. The second place I usually visit is pipphil.eu. Here the “Telford’s” search led me to the following:

(Te — Pipes: Logos & Markings (pipephil.eu)). Well, at least it wasn’t a total bust. I could find no sign of a present or worn “T” on the stem. There was scant information to go on, though. A quick Google.com search of Telford’s did come across a Telford’s Pipe and Cigars, Inc., located at 664 Redwood Highway, Mill Valley, CA 94941. That was quite specific. The website included this at the bottom, “Copyright © 2012 – 2013 – All Rights Reserved.” By the look of things like events and photos the site had not been updated from the 2012-2013 dates. When I perused their “About us” page, I found that in 2012-2013 Brian & Susie Telford were the owners and that the shop had been in business for 30 years. Now, I was a science teacher, not math but my limited skills would deduce that the shop opened in the 1980 or thereabouts. I vowed to call during business hours the next day. On the “Events” page, again not updated since 2012-2013, there was mention of a Golden Gate Pipe Club who met at Telford’s on October 4, 2012 for their monthly meeting. A search for “Golden Gate Pipe Club” led to a Facebook page. This page was also from 2012 and showed a meeting at Telford’s on October 4, 2012. I am assuming that it would have been the first Thursday of the month with a stated time of 8:30-10:00.

A further check of Telford’s Pipe and Cigars, Inc. showed that there was an active Facebook page (https://www.facebook.com/events/telfords-pipe-cigar/golden-gate-pipe-club/159196560885720/).

One question remained, who made this pipe? I started with Comoy’s due to the fact that I had seen a couple of mentions of Comoy’s pipes on Telford’s website. Comoy’s shape chart from pipedia.org verified that the 296 shape was indeed a Canadian.

(https://pipedia.org/wiki/Comoy%27s_Shape_Number_Chart). That was enough proof for me. Using the Telford’s shop website as a timeline source the pipe was made from the early 1980s-present. The pipe did appear to have been heavily used with worn sandblast and heavy oxidation so I assumed it was used heavily during the 1980s and 1990s. That call to Telford’s might provide a more narrow date.

I was able to contact Brian Telford at his shop and he was quite gracious with his time. He said that this pipe would have been for the 1970-1980s. During this time Comoy’s would offer lots, usually a gross, of their “seconds”. These were pipes that had imperfect blasts or fills which made them ineligible for sale as “Comoy’s” pipes. Mr. Telford explained that Comoys made a stamp for Telford’s and stamped the pipes for the shop (personal communication with Brian Telford 7-30-2024).

This narrowed down the maker and date of production of this Telford’s 296 Canadian made by Comoy’s of London. Now it was time to return this old girl to service.

The Restoration

The restoration began with a light buffing of the stem with 0000 steel wool to remove the calcium and outermost oxidation.

A pipe cleaner was inserted into the tenon end of the stem as a hanger and the pipe was placed into Before and After Extra Strength Deoxidizer. And allowed to soak overnight.

The reaming tools were assembled and put to work.

The PipNet with its #2 blades did most of the reaming. The #3 blades were too large and the tobacco chamber needed a good deal of scraping after the PipNet.

Below you can see a much better photo of the cracked bowl from inside the chamber.

The chamber did show signs of light spider webbing all around the interior of the chamber.

The stummel was taken to the sink for a scrubbing with undiluted Murphy Oil Soap and a medium toothbrush. A second scrubbing of Murphy’s was done with a stiffer nylon scrub brush to better remove the accumulated grime. The stummel was rinsed of soap with warm water and dried with a cotton hand towel.

Back at the workbench the stummel looked much cleaner and the crack could be examined in greater detail.

Other areas in need of repair were also made more apparent, the two deeper pits on the right shank and (shown below).

And the two depressions immediately above the left heel.

The rim also still had lava issues and would require a light topping. There were a couple of smaller surface cracks which appeared to be only superficial in nature.

I wiped the surface of the stummel with a make-up pad dipped in 95% ethyl alcohol. The made came back with more grime. My scrubbing was not as good as I thought it was.

I then proceeded to scrub the stummel with the toothbrush and 95% ethyl alcohol and wipe it with a clean make-up pad. More accumulated grime came off.

A repeat of the above scrubbing cleaned off additional grime.

And a third alcohol toothbrush scrub.

All told, the stummel was scrubbed 3 times with alcohol and toothbrush after the double Murphy Oil Soap scrub. I was pretty sure the previous owner was a car mechanic who smoked the pipe while working on car engines with dirty oily hands during the day and labored in a coal mine at night. Now the coal mine scenario might be a stretch as coal dust and smoking would probably create a bit of mischief but I’m sure you see my reasoning.

The shank cleaning was next. Cleaning here included pouring 3-4 ml of 95% ethyl alcohol into the tobacco chamber and scrubbing with a nylon shank brush. After the scrubbing the alcohol was poured into a medicine cup. The airway was then scrubbed with bristle pipe cleaners dipped in ethyl alcohol. Alcohol dipped cotton swabs were also used to clean out the mortise area. This process was repeated numerous times. I was making progress albeit slowly. I decided to give the airway a cotton alcohol overnight soak to dissolve and loosen the remaining tar deposits. The tobacco chamber and shank were stuffed with cotton and 95% ethyl alcohol was added to the cotton via a disposable pipette until the alcohol pooled on top of the cotton. The pipe was angled allowing the shank end and rim to be approximately level and saturated with alcohol.

The next morning the cotton showed that it had absorbed old smoking residue as the alcohol evaporated.

The cotton, now fairly dry, was removed and with it a good deal of the tar.

Further cleaning of the airway went much faster and soon revealed clean pipe cleaners.

The stem was removed from the Before and After Extra Strength Deoxidizer and allowed to dip excess solution back into the jar.

The remaining residual solution was wiped with a coarse shop rag.

The stem looked much better.

Several make-up pads drizzled with SoftScrub were used to scrub the remaining oxidized rubber from the stem surface.

I then went to work repairing and rebuilding the tooth damaged stem using sanding sponges to prepare the damaged areas.

The dents were painted with the flame of a lighter in an attempt at raising the dent a little bit. This met with little success. Filling the dents with black cyanoacrylate (CA, super glue) was required. The dents received a light fill of the black CA.

This was then spritzed with a CA drying accelerator. This allows the CA to cure within seconds.

The cured CA was then filed with a flat diamond needle file to smooth the CA.

The remaining depressions appear shiny as they had not been touched by the file.

An additional fill of black CA was applied and spritzed with a drying accelerator.

The second application once cured was then filed and smoothed with a 320 followed by a 400 grit sanding sponge.

Additional small applications of CA, filing and sanding were done.

Eventually the stem looked far more acceptable.

The stem airway was cleaned out using bristle pipe cleaners dipped in 95% ethyl alcohol.

It was time to start planning the crack repair. A little about this technique: Charles Lemon of dadspipes.com wrote a wonderful restoration blog about his technique for repairing cracked bowls (https://dadspipes.com/2016/03/08/a-crack-pinning-tutorial/). I had tried this pinning with a cracked diamond stem on a blog a while back (https://wordpress.com/post/scimansays1787.com/5886). Now I realize that I tried to use it on a stem not a bowl but I was more interested in practicing using the technique and to see if it would work with a stem. Besides, I did not have a pipe with a cracked bowl at that time. Anyway, It worked and I learned several things from my hands-on practice. Feel free to check out my blog and comment on all my mistakes, I own-up to all of them. Below you can see the steps of Charles’ pinning technique as they were intended.

I first marked the two entrance points where I wanted to drill two 2mm holes to place the 2mm brass rods. The brass rods reinforce the cracked area and are glued in place.

I used a rat-tail needle file to make depressions for the drill bit.

The plan was to drill the holes at two different angles to prevent the crack from being able to widen.

Below is a photo attempting to show the two angles without a big dumb thumb in the way.

The stummel was clamped into an adjustable vise allowing the best angle for me to comfortably drill while seeing the path of the drill bit.

I accidentally went too far with the top hole and exited the stummel. I had marked the drill bit with a sharpie marker but either I was not paying enough attention or the path of the boring was shorter than anticipated. The bottom drilling went as planned and did not exit on the far side of the entrance. Note that you can see the top brass pin through the crack.

Another view of the pinning angles.

And another view.

I used a wire cutter to cut the brass rod to length. I wanted the rods short enough that there would be no brass visible when they were placed into the holes. This was something I learned from my first attempt. The brass rods were roughed up with 320 sandpaper to allow the glue additional surface area to bond to.

I mixed J-B Weld 2 part epoxy as per the instructions on a plastic lid.

Once thoroughly mixed the epoxy was dabbled into the hole with a longer piece of brass rod and worked into the crack itself.The sanded rod pieces were pressed into place and pushed deeply into their respective hole with a longer piece of brass rod. Epoxy pushed out through the miss-drilled exit hole. This made me happy to know that the glue had indeed made it deep into the holes.

The excess epoxy was removed using a dry cotton swab. The area on each side of the crack was cleaned of epoxy with a cotton swab dipped in acetone. The interior of the tobacco chamber was wiped of excess epoxy with a small wooden popsicle stick. A clamp was used to compress the sides of the stummel and the stummel was set aside to dry/cure for 24 hours.

The next day, Iremoved the clamp and everything looked like it had gone according to plan.

It was now time to work on filling the holes, crack and other flaws in the briar. I used brown CA and briar dust for the fills.

Careful placement of CA with a fly tying bodkin was needed for this as the blast patterns would not allow for sanding. I then used a dental scraper to scoop up a small pile of briar dust and placed it onto the wet CA and used the back side of the scraper to press the briar dust into the CA. The extra briar dust was then brushed off with a brass brush and the fill was filed with a rounded or rat-tail diamond needle file. I tried to file to match the grain pattern of the blast.

The depression of the crack on the rim was filled in similar fashion to the above. Here I was able to sand the fill smooth with a topping board, AKA a piece of 320 sandpaper laid flat on a counter.

The shank depressions were also filled with CA and had briar dust pressed into them. The new fill was filed and in an attempt to leave some texture to match the existing blast pattern.

The heel fill proved to be quite large. This area had most of the blast pattern worn away by I assumed, use. I used a Dremel rotary tool to retexture the surrounding area.

Once all the fills were completed, I wanted to blend and conceal the fills. I chose Dark Brown Fiebing’s Leather Dye for this. The needed dye kit was gathered.

Below is the pipe after having been dyed and flamed with the lighter.

I then took the pipe to the buffer and used rouge buffing compound to buff away the outermost layer of dark brown dyed briar. Returning to the workbench I wiped the stummel with a couple of make-up pads dipped in 95% ethyl alcohol.

The pipe was given a coating of Before and After Restoration Balm and allowed to sit for 15 minutes absorbing the balm and letting it work its magic.

The pipe was then taken to the buffer for several coats of carnauba wax. Normally I don’t like to use carnauba wax and the buffer for rusticated or sandblasted pipes but the blast of this old pipe had been worn quite smooth by handling and I thought that it would turn-out ok.

Upon seeing the stem of the Telford’s Canadian under the bright light of the photography station I was unhappy with the way it turned out. Given, it was far better than it was upon arrival.

Back to the workbench. I taped the shank of the pipe and redid the entire sanding sequence. This is probably never going to be a pipe put up for sale so I wasn’t sure why I was doing this. I guess my obsessive-compulsive disorder (OCD), which should be CDO so that the letters are in alphabetical/proper order, got the best of me. After the sanding sponges I micro-meshed the stem and failed to photograph that.

The stem was rewaxed and returned to the photo station. It was better but… I was done, this time.

If the goals of this restoration were to successfully repair a cracked bowl using brass pins and to find the provenance of the pipe, I was successful. Regarding the worn nature of the blast, the oxidation of a stem or the heavily and hotly smoked tobacco chamber, there was only so much restoration could do. Still the pipe turned out fairly well.The crack repair and the subsequent blending of the repair looks good. The fills and their retexturing also turned out well. The rebuilding of the stem is nice and comfortable. Its appearance is not what I would call good. I cannot figure out how brown oxidation is still showing. I layered at least three coats of black CA over that sanded vulcanite and the result remains brown in appearance. Well at least in normal room lighting it looks good. The final let down is the fact that the MADE IN LONDON, 296 and the E were lost during the restoration. These were all on the faint side to begin with and seemed to have been stamped onto the finish of the pipe rather than onto bare briar. Their loss still bothers me. The dimensions of this beat-up beauty are:

Length: 5.80 in./ 147.32 mm.

Weight: 1.12 oz./ 31.30 g.

Bowl Height: 1.70 in./ 48.01 mm.

Chamber Depth: 1.73 in./ 43.94 mm.

Chamber Diameter: 0.83 in./ 21.08 mm.

Outside Diameter: 1.35 in./ 34.29 mm.

I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Made in London Telford’s Canadian 296.

I had to take one photo of how the stem appears at a slight distance. It looks good.