Photographed and written by
John M. Young
Here I go again with another Marxman. Okay, I haven’t restored a Marxman since March 18, that’s like four months. In dog years it is over two years. I think it is about time to return to one of my favorite brands and this is a beauty. An unsmoked Mel-O Pear. How it ended up with a cracked shank, I’ll never understand. This darling came to me from eBay, and traveled all the way from Yuma, Arizona. Maybe that dry desert heat is what contributed to the crack. The description from the seller read as follows, “Vintage Marxman Tobacco Pipe Melo-O Imported Italy there minor cracked other than that very good”. Where they got the “Imported Italy” from is another mystery. True the stamps are faint and partial but I can make out a “B” after IMPORTED and the last time I checked Italy starts with an “I”. The other stamps are MEL~O over MARXMAN. The “MAN” looks to have suffered the same fate and the BRIAR never having been properly stamped. Below are some photos of the Marxman Mel-O as it arrived.
Background
On January 11, 2024 I blogged about a Marxman Gold banded Dublin (linked if you are interested) and wrote the following about Robert Marxman and Marxman pipes:
“My recent fascination with the post-World War Two (WWII, to properly use an acronym) led me to further appreciation of the Marketing genius of Robert Marx, the founder of Marxman Pipes Inc. Allow me to illustrate:
(Pipe Lovers Magazine 1946 all numbers : Free Download, Borrow, and Streaming : Internet Archive)
Those are the back covers of Pipe Lovers Magazine for each month of 1946. That represents a substantial investment in building and maintaining one’s brand name.
Here is a quick review of Marxman pipes from pipedia.org:
“Marxman (Marxman Pipe Company) was created by Robert (Bob) L. Marx in 1934, when he was 29, and after he had worked for the William Demuth Company. His pipes were not outstanding because of the quality of their wood (probably Algerian), but Bob started making unique sculpted pieces, which brought the brand fame in the World of Hollywood cinema. Actors like Zachery Scott, Dennis Morgan, Jack Carson, Alan Hale, Joel McRae, and Ronald Reagan were some of the faces that appeared on the bowls.
Bob knew how to innovate and took full advantage of marketing and press advertising in order to sell the brand–one of his slogans being “Relax with a Marxman”.
In a recent forum post on Pipesmagazine.com, contributor jguss posted the following from the February 2, 1935 issue of the United States Tobacco Journal:
A remarkable article showing the business acumen as well as a photo of the man himself. Thank you, jguss.
This is one of my favorite quotes about Rober Marx:
“Ted also said: Several years before UST bought Mastercraft, M/C had aquired Marxman Pipes. A wonderful kind man, Bob Marx was still working as a salesman in NYC, and I was fortunate to make a few sales calls with him. You all remember Charles Atlas? Bob Marx was about 76 and had just been awarded the (I think) Atlas Award for being the finest speciman of manhood over 70 years old in NYC, or maybe the state.
M/C had some inventory of Marxman stuff, but not a lot. I know very little about Marxman. Did they make, import, or both?” (Mastercraft – Pipedia)
The “Ted”, who is being quoted above, was the nickname of Tom Douglas. Here is an announcement of Mr. Douglas’ passing from Pipesmagazine forum November 26, 2018:
“Tom Douglas passed away at 71 years of age, this past Saturday, in Florida. It seems he had an infection in his stomach, but I don’t know much more than that, regarding what actually contributed to his death. He did have a history of heart and other health complications. I just spoke very briefly with his wife Joyce; you can imagine how she’s doing.
The impact Tom had on the pipe community is huge…beginning with an immense library of pipe knowledge through the pages of the Dr. Grabow Collectors Forum….his 25 years of service at the Grabow / Sparta pipe factory (where he retired in 1991)….his executive leadership over Mastercraft distribution for many years…”
So, at 76 years old Robert Marx was still involved in the business that he must have loved. This would have been around 1980.”
Then last winter, Mark Irwin, of Peterson Pipe Notes and author of The Peterson Pipe book, sent me a c. 1945 Marxman Brochure. I photographed the pages of the brochure and included them below.
One of the easiest things to date is a Marxman pipe. The company was formed in 1939 and sold in 1953 to MasterCraft. Though the Marxman name continued after 1953 the pipes were made in France or Italy and stamped as such with Country of Manufacture (COM) stamps. This means that a non COM stamped Marxman pipe was made in New York City between 1939-1953.
The Restoration
A clean denim piece on the work surface began this restoration. The edge of the shank was given a very slight bevel with 320 sandpaper. You can see the lighter ring on the briar below from the sanding.
I checked which size of brass tubing would be the best fit for a band for the Mel~O, ⅝ inch was nearly perfect. I measured how wide I wanted the band. For this pipe a narrow band seemed appropriate and would provide the strength needed to compress the crack and not cover the carvings on the shank. A pipe cutter was used to cut the 5/8th inch stock.
The band was cut. The interior edges were lightly filed with a rounded needle file, giving them a very slight bevel on bothe the interior and exterior surfaces. Then the edges were lightly sanded with 320 and 400 grit sanding sponges.
There was zero draw through the pipe. I removed the stinger and noticed that it was completely sealed with some obstruction.
Using needle nose pliers I was able to pull a couple of tiny pieces of metal from the end of the stinger.
At this point I assumed the stinger was meant to be a tube rather than a cylinder. I thought that maybe a previous owner had somehow wedged a pipe cleaner into the draft hole. I tried pushing a fly tying bodkin through what I thought to the tube. It was completely sealed.
I figured that it might be worth a try to drill out the hole through the tube. I tried a couple of drill bits and found the 5/32 inch to be the best fit.
Holding the stinger firmly with a Vise-Grip I tried drilling the aluminum with an electric drill. This proved pretty futile. There was no way that I could hold both the stinger and the drill straight enough to allow a good hole through the aluminum.
To make matters worse there appeared to be a steel wire within the aluminum which was pushing the drill bit to the side. With continued drilling the bit would be forced to the side of the aluminum stinger not through the center. I abandoned the idea of drilling the aluminum. Hmm, perhaps this is the universe’s way of telling me that I need a drill press?
I thought about various stingers. Many are a solid piece of aluminum but they have a groove or slot milled in them to allow for an airway. Perhaps this piece was supposed to have a slot cut in it. How this was neglected, if it were indeed neglected, made little sense but stranger things have happened. I set the stinger aside and continued pondering as I worked on the next task.
The next task was cleaning up the stem. This pipe must have been stored in a box or drawer as it had minimal oxidation, pretty amazing for a 75 year old pipe. I first sanded the surface with a 600 grit sanding sponge. This removed the surface oxidation and dirt and also revealed a strange rough spot. Try as I might I was not able to get rid of the rough area with the 600 sponge so I backed off to a 400 grit sponge. This worked to remove most of the rough area. The spot was resanded and smoothed with the 600 sponge.
I then scrubbed the stem with SoftScrub on make-up pads. This removed additional oxidation and left the stem looking like and black with fresh clean vulcanite.
As I drew air through the stem I heard a whistling. I took this to mean that there was a turbulent flow of air through the airway. The tenon was flat cut. Why not give it a nice countersunk bevel and polish that a bit, I thought.
Using a couple drill bits I just held in hand and twisted the bits removing the rubber from the tenon. This was then sanded with 220, 320 and 400 sandpaper to smooth the bevel. Below you can see the polished bevel. Drawing through the pipe was now silent.
The stem airway was quite clean and only produced the dirt from manufacture and age on the pipe cleaners dipped in 95% ethyl alcohol.
Next the stummel was taken to the sink to rid it of it’s accumulated grime. The three amigos of scrubbing were present and accounted for.
From previous experience with the soft Algerian briar that Marman used I opted not to use the brass brush on the rusticated carvings. I began with Undiluted Murphy Oil Soap and a medium stiff toothbrush. Additional Murphy’s was added and a second scrub with the nylon scrub brush was done. The soap was rinsed with warm water and the stummel dried with a cotton hand towel.
Below is a photo of the scrubbed stummel back at the workbench. I took the shininess to indicate that wax or finish was still present on the briar.
I scrubbed the stummel with 95% ethyl alcohol and a toothbrush to remove any traces of shine.
The stummel was then scrubbed with 95% ethyl alcohol on a make-up pad. Extra attention was paid to the carving grooves.
And again.
There we go, no more shine. I then started to fit the band to the shank. The shank needed to have a slight bit of briar removed in order for the band to fit. I slowly and carefully filed the shank end. I wanted the band to be press fit. A hard press, that is.
Eventually I got the fit that I wanted. I applied thin cyanoacrylate (CA, super glue) to the crack, the thin formula allows ready penetration into the crack. The band was then pressed into place using a tapping block. The outside end of the band required a little bit of filing to allow a precise fit with the stem and a light sanding with 400 and 600 sanding sponges.
The pipe, stem and stummel, were then sanded with a sequence of sanding sponges from 400-1500. Between each sponge I wiped the stummel with a make-up pad dipped in alcohol. The stem received a dab of mineral oil from my fingertip rubbed onto the vulcanite then wiped with a paper towel.
The above was repeated for the 2000-3500 sanding sponges.
The pipe was then micro-meshed with 4000-12000 pads. The stummel was wiped as before while the stem received Obsidian Oil rather than mineral oil.
The pipe was then given a coat of Before and After Restoration Balm and allowed to sit for 20 minutes.
@0 minutes later the Restoration Balm was wiped from the pipe with an inside out athletic sock. Again extra attention was paid to rubbing the carved grooves thoroughly.
I wasn’t sure which type of wax would be best for protecting and preserving the rusticated carvings. I opted for Renaissance Micro-Crystalline Wax. No, not because I like the smell. Well, yeah, kind of because I like the smell. Also because it seems to penetrate into the non-sanded briar.
The wax was applied with a baby toothbrush.
I let the wax dry for 15 minutes and replaced my carnauba wax buffing wheel with a clean flannel wheel and buffed the stummel. I used the corner of the wheel to work into the carvings.
The carnauba buffing wheel was returned to the buffer and the stem, rim and stampings received several coats of carnauba wax.
This was a fun restoration as I enjoy banding cracked shanks. I think the polished brass gives the rusticated briar a touch of classiness. The briar of this Mel~O shows some grain pattern on the rim, nothing great but still pretty. The color though is outstanding and is contrasted very nicely with the glossy black vulcanite separated by the brass band. Overall I am pleased with how the pipe turned out. I am looking forward to the first smoke with this Marxman. There is something unique about the briar with these old pipes, they have a slight spiciness like cinnamon and nutmeg when first smoked. You can get it from a freshly reamed and sanded Markman as well. Strangely satisfying or, I could be imagining it allowing my tastebuds to succumb to my weird emotional attachment to the brand. Either way, I like these old pipes. The dimensions of the Marxman Mel-O Pear are:
Length: 5.40 in./ 137.16 mm.
Weight: 1.30 oz./ 37.00 g.
Bowl Height: 1.61 in./ 40.89 mm.
Chamber Depth: 1.10 in./ 27.94 mm.
Chamber Diameter: 0.78 in./ 19.81 mm. (conically bored)
Outside Diameter: 1.58 in./ 40.13 mm.
I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.
Below are some photos of the finished Marxman Mel-O Pear.
NebraskaPeteGeek 