Vox Pop pipe – NebraskaPeteGeek

Photographed and written by

John M. Young

It is time for the final addition to the Penn Tobacco Company coupon pipe collection. Let’s start with the name of the pipe from the stapings. This is a VOX POP over SUPERB BRIAR on the left and AIR CONDITIONED on the right. There is no shape number. I turned to the internet for the definition of Vox Pop. According to the Cambridge Dictionary; “the opinions of people recorded talking informally in public places” and, “a broadcast for radio or television in which people going past in a public place are asked their opinion on a particular subject”. (https://dictionary.cambridge.org/us/dictionary/english/vox-pop)

In other words, the person on the street interview. When this pipe was made, I’m guessing late 1940s-50s, radio was a much more important media for information. Don’t tell the Librarian but, I used Wikipedia for this next quote: “Vox Pop was a popular radio program of interviews, quizzes and human-interest features, sometimes titled Sidewalk Interviews (1936) and Voice of the People (the name is from the Latin “Vox Populi”, meaning “Voice of the People”). It was heard from the early 1930s to the late 1940s.” (https://en.wikipedia.org/wiki/Vox_Pop_%28radio%29). That actually helps confirm the date of this pipe and provides more meaning of the name. The Air Conditioned stamp refers to the carburetor feature of this pipe.

I am not certain of the name of this pipe shape. Henry Leonard and Thomas Inc. actually manufactured this pipe and the three other pipe lines for Penn Tobacco Company’s promotional pipes. The pipes were available to customers of Penn Pipe tobaccos such as

one of their largest selling brands, Kentucky Club pipe tobacco. According to https: //www.tobaccoreviews.com/:

“Original Kentucky Club pipe mixture. The label on the tin reads as follows: “White Burley – recognized as a better tobacco since 1867 – makes Kentucky Club the smooth, mild, satisfying pipe smoking brand with the grand aroma. An aromatic that you, and the family too, will enjoy. “Kentucky Club’s White Burley blend never tires your taste. Its delightful flavor, enjoyable taste, satisfying mildness, and grand aroma give you the greatest enjoyment in pipe smoking.”

Notes: Kentucky Club was introduced in 1934 by Penn Tobacco Company of Wilkes Barre, Pennsylvania. In 1943 The Bloch Bros. Tobacco Co. of Wheeling, West Virginia bought the company. In 1969 it was purchased by general cigar. In the late 80’s it was purchased by John Middleton Inc. of King of Prussia, Pennsylvania, where it was last blended.” (https://www.tobaccoreviews.com/blend/1171/john-middleton-inc-kentucky-club/?pagenumber=2&orderBy=tr.UpVotes)

The association of Penn Tobacco Company and Henry Leonard and Thomas Inc. (HLT) was a marketing venture where both companies benefited; pipe smokers needed both tobacco and pipes. Vox Pop was a brand of pipes only available as a pipe from Penn via the coupons included in packages of pipe tobacco. Penn produced the tobacco while HTL produced the pipes for Penn. Pilehil.eu explains this and three other lines of pipes below.

Brand of the Penn Tobacco Company formed in Wilkes-Barre Pennsylvania in 1901 by Russell Uhl († 1914) and Henry Weigand († 1942). Bruce Peters was a Treasurer of the company.

There were four pipes in the line offered by the company: the Bruce Peters (top of the line), the Silver Mac Duff, the Vox Pop, and the Broadcaster. The pipes were manufactured for Penn by Henry Leonard & Thomas, manufacturers of Dr. Grabow pre-smoked pipes.

(http://www.pipephil.eu/logos/en/logo-b8.html#brucepeters)

Back to the shape of this pipe, I originally wanted to call it a Dublin but it did not have the flared rim characteristic of a Dublin. Then I thought to call it a Zulu, which fits the forward cant of the bowl but this stem is straight and the shank is round, not oval. I then looked at the Dr Grabow shapes from 1960 flyers. I wanted to find a match and give this pipe shape a name. Nope, it couldn’t be that easy. Below are two shape charts from pipedia.org. The Dublin shapes, from the chart on the right, have a slight forward cant but it is slight.

That is a cant of less than 10 degrees. The Dr Grabow 65 Quarter Bent Oval Shank from the left chart has an angle of about 12.5 degrees. My computer protractor skills are still in development.

The Vox Pop has angles that match very close to the Dr Grabow 65 shape without the oval shank of the quarter bent stem. Now, this could be explained as this pipe does not have its original stem but I do not feel that I can refer to it as a Quarter Bent with no bend.

Here is the Executive decision: This is a Vox Pop Superb Briar Air Conditioned Zulu. Or, if you want to be crazy, you can call it a Zublin. I won’t tell anyone.

The blogs of the previously restored Broadcaster, Bruce Peters and Silver Mac Duff also have historical information and commentary. I added links with the names to their respective restorations. Feel free to peruse them all.

This Vox Pop was purchased as a lone pipe from an eBay seller. Upon arrival I photographed the pipe before doing any work to it.

The Vox Pop was a wonderfully dirty, well used pipe that appeared to have some very pretty briar hiding beneath 70 years worth of grime. I interpret a well used pipe as a good smoking pipe.

The first step was to prep the work surface with a clean piece of denim. Next was to call forth the plastic reaming surface and the reaming tools.

That included the Scotte stainless steel reamer, Smokingpipes Low Country knife, General triangular scraper, 220 sandpaper wrapped wood dowel and the 320 sandpaper wrapped Sharpie marker. If you are wondering why there was no PipNet its because my #1 blade broke. Apparently the translucent plastic PipNets are not nearly as tough as their older opaque versions.

The reaming liberated the cake from the briar. Scraping with the knife and scraper got down closer to the briar then the sanding exposed the briar. There was no sign of any heat damage to the interior of the tobacco chamber.

There was a thick deposit of lava on the rim from years of use and/or many bowls of tobacco. I moistened this with saliva.and scraped it with a sharp pocket knife.

Here you can see the rim ½ scraped with the scrapings wiped on the paper towel. Ew, gross.

Below the rim is all scraped.

After the rim was scraped I took the stummel to the sink. Here I scrubbed the stummel with undiluted Murphy’s Oil Soap and a medium stiff toothbrush. After the scrub the stummel was rinsed with warm water and dried with a cotton dish towel.

I returned to the workbench and examined the stummel for the finish that survived the scrub. There were several shiney areas. You can see the shank-bowl junction was shiney.

The front of the bowl had some shine as evident in the next two photos.

I rubbed the stummel with a make-up pad moistened with 95% ethyl alcohol to see if that would remove the finish. It did but there remained some stubborn areas.

I then tried acetone on a make-up pad. That removed the remaining finish revealing the briar grain and a couple spots to fill.

I do not know what happened during the airway cleaning of the shank and the stem. I can tell you that I did clean them but I failed to take any photos of the process. The only thing I can think happened was that I was pretty engrossed with watching the final couple of episodes of the Netflix Medici series. I know that is no excuse. One other thing, if you have watched Medici and Yellowstone, do you agree with me that they are really the same show? I mean, Lorenzo Medici saves the bank & family from nefarious villains in nearly every episode just as John Dutton saves the ranch & family from nefarious villains. I guess it is just a story telling formula that works.

To protect the stamps from the ravashes of sanding I cut strips of painters tape and covered the stampings.

Next I lightly sanded the area to be filled with the 400 sanding sponge. I let the sponge retain the dust from the sanding. The pits received a small drop of brown cyanoacrylate (CA, super glue) applied with a fly tying bodkin. Before the CA set-up I sanded the area with the dusty sanding sponge. THe dust on the sponge combined with the CA to fill the pitted areas. This technique works best for small fills and will require a second application if the pit is larger or deeper.

The stummel was then sanded with the series of sanding sponges from 400-3500. Between each sponge I wiped the stummel with a make-up pad wetted with alcohol to remove any sanding debris. The tape was removed after the final sanding sponge.

After the sanding I used the 4000-12000 micro-mesh pads in sequence. In between each pad I wiped the stummel with a make-up pad moistened with alcohol, as with the sanding sponges.

The last treatment for the stummel was to receive a coating of Before and After Restoration Balm. This was allowed to do the magic that it does for about 20 minutes.

I turned my attention to the stem. It was in pretty good shape and appeared to only have surface oxidation and calcium deposits. I opted to sand the vulcanite with the 600 sanding sponge to see if the oxidation was deeper than it first appeared.

The stem looked pretty good but I wanted to make sure there was no oxidation present so I applied Soft Scrub to a make-up pad and started scrubbing the stem. The Soft Scrub removed a good deal of additional oxidation. After the Soft Scrub scrubbing the stem was given a coating of mineral oil and allowed to soak for 30 minutes.

In the meantime I used an inside-out athletic sock to wipe away the remaining Restoration Balm, revealing some very pretty grained briar.

I then wrapped the shank in painters tape and inserted the stem. I did not want to round the edges of the stem at the stem-shank joint.

The stem was sanded with the series of sanding sponges from 1000-3500 grit. Between each sponge I applied mineral oil to the stem with my fingertip and wiped off the stem with a paper towel.

After the sanding sponges, I used the micro-mesh pads in sequence from 4000-12000. In between each pad I applied a drop of Obsidian Oil, rubbed that in with my finger tip and wiped the stem with a paper towel.

The stem looked good but all of the airway cleaning had a stem loosening effect that I was not happy with. Yeah, I know – the undocumented airway cleaning. I said I was sorry. Jeez. Anyway, it might have been tightened up by just smoking it but then I would have to clean it all again, probably without documenting it. If this were a pipe I was planning to keep I would be inclined to apply a little bit of molten beeswax to the tenon and tighten it that way. Since this pipe will hopefully find a new steward I wanted a more permanent solution. I used a short bristle paint brush known as a “dry brush” in figurine painting to apply a thin coating of black CA to the tenon. This is done carefully and allowed to dry without accelerant spritzing. Once dry the CA is micro-meshed smooth. The stem is inserted and checked for fit. If too loose another light coat of black CA can be applied. If the stem is too tight additional micro-meshing evenly around the tenon will adjust the fit. In this case a single light coat was all that was required. By the way, the CA will harden and make you think that you have destroyed your brush. Don’t worry, a soak in acetone dissolved the CA and returns the brush to near normal.

With the stem well fit I hand polished the stem with Before and After Fine Polish followed by their Extra Fine Polish. Both polishes were applied and buffed with a soft cotton cloth. Again no photos but here are the products in question:

I have to say that this pipe is probably my favorite of the four-pipe set from HT&L via the Penn Tobacco Company. The Zulu shape is just one of my all time favorites. The briar grain is pretty, the vulcanite polished up nicely and the aluminum spacer gives the pipe a little accent that I find endearing. I am glad that my compulsive personality led me to collecting and restoring each of the Penn pipes but seeing all four together is just a piece of history that can now be passed along to their next steward. I do hope that you found something here useful in restorations of your own or had some fun reading this. If you enjoy this sort of thing, please click the like and subscribe buttons. I thank you for reading the ramblings of an old pipe lover.

Below are some photos of the finished Vox Pop Superb Briar Air COnditioned Zulu( that is a mouthful) and photos of the four Penn Tobacco co. crew.