““Peterson” “01”“

Photographed and written by

John M. Young

It seems like I haven’t worked on a Peterson pipe for a while but, that’s not true. I did that Captain Pete commission just a couple of weeks ago. Oh well, I’ll use my newly created meme anyway:

This restoration is on a Peterson I have never worked with a Kapp-Royal bent pot 01. This beauty was spotted on eBay back in April of 2025. I remember when I wouldn’t pay more than $45 dollars for a Peterson pipe. Then Inflatron (the inflation monster) attacked like Godzilla. Sadly this Irish lass was a bit more than the $45 but all things considered it was still reasonable. The stampings are all clear and read as follows: Peterson’s over “KAPP-ROYAL” on the left shank, with MADE IN THE over REPUBLIC over IRELAND, offset 01, on the right shank. Below are some photograph taken prior to work on the pipe.

The Kapp-Royal was in very good condition. The stem had light oxidation and no tooth chater, to speak of. The briar looked very nice with fine birdseye’s on both flanks. The gap where the stem met the stummel was an annoyance which would have to be addressed. Other than a few minor fills and some sanding/polish this beauty would be ready for a new owner in no time.

Background

For the first three pieces of Peterson history I turned to the official Peterson website. Here, I chose quotes from the general history of Peterson, the “Classic” shape range, and the 01 shape in particular:

As the oldest continuously operating briar pipe factory in the world, we at Peterson have a certain tradition to uphold, a legacy of craftsmanship dating back over 150 years. Whether you’re browsing for your very first pipe or are a seasoned collector in search of a rare gem, know that every pipe in our catalogue carries with it that same preservation of tradition. A Peterson pipe isn’t just a utilitarian tool; it’s a piece of history you can carry with you in your travels, a faithful companion to accompany you through all that life offers. (Peterson.ie: Pipes)

One of our most popular shapes, our signature take on the bent Pot enhances the inherently muscular design with a broad, squat bowl and extra-sturdy proportions through the shank and transition, as well as an elegant quarter bend. (Peterson Pipes: Army Filter Heritage (01) Fishtail (9mm))

Since our inception, we’ve offered a range of specific tiers suited to our customers’ tastes and price requirements. Our Classic range represents non-System pipes crafted for the Everyman, unique and timeless designs that capture our House Style and quality craftsmanship at a price any smoker can enjoy. Rather than relegating production to one or two lines, we offer a variety of styles, shapes, and finishes among these entry-level series, including traditional navy mounts (flush-fitting stems), P-Lip mouthpieces, and army mounts. (Peterson.ie: Classic Pipes)

Next I looked into the big The Peterson Pipe book (Irwin, Mark and Malmberg, Gary (2018). The Peterson Pipe The Story of Kapp & Peterson, First edition, second printing 2021. Briar Books Press, Canada.) for a more specific account of the Kapp-Royal line.

“Kapp-Royal (1969. 1976-79, c. 1988, 2004-) First appearance as a line introduced 1969. In 1976-79 Iwan Ries catalog offering identical with non-System Dunmore line. Second appearance the late eighties as a high-grade Italian-market line with briar band inset into mouthpiece. From c. 2004, Italian line available in the US as high grade, orange finish, sterling band, amber-colored acrylic fish-tail stem or sometimes vulcanite, embedded aluminum P.” (Irwin and Malmberg p. 306)

According to the above description by Irwin and Malmberg, this pipe is likely a Kapp-Royal from the “c. 1988” period and made in the Dublin factory.

The Restoration

The Kapp-Royal made its way to the workbench after the “Before” photo shoot. Here it received a cleaned denim piece and a more thorough examination.

Below you can see that gap I was referring to earlier. I couldn’t see an obstruction to a tight fit but there certainly was one.

The original fills had failed and would need fixing. Fortunately they were a distance away from the stamps.

Another old fill was located on the heel.

The reservoir, well not really a reservoir since this is a Classic 01 and not a System pipe, was surprisingly dirty. That could definitely be the culprit for the ill fitting stem.

The tobacco chamber looked very clean. I could even make out the chuck marks from the Peterson factory. How could a chamber this clean have a shank that is fouled so badly?

Below is another shot of the chamber prior to work done. It had obviously received some scraping by the marks at the bottom of the chamber yet the rim looked pristine.

I figured there was no reason to ream this tobacco chamber so proceeded directly to sanding it. I could see no damage to the chamber other than the scraping marks at the bottom of the chember.

The shank cleaning was far more difficult. Here I used the following techniques: Nylon shank brush scrubbing with alcohol present, Folded bristle pipe cleaners dipped in alcohol, cotton swabs dipped in alcohol and dental scraper scraping.

The stem was, like the tobacco chamber, surprisingly clean requiring only a couple bristle pipe cleaners wetted with alcohol. The stem did not need to be treated with either Before and After Extra Strength Deoxidizer or Briarville Pipe Stem Oxidation Remover. I thought sanding/polishing would suffice. I did apply a coating of mineral oil to the stem though.

The stummel made its way to the sink for a scrub with undiluted Murphy Oil Soap and a nylon brush. The soap was rinsed with warm water and dried with a cotton hand towel.

Back at the workbench the stummel was wiped with a make-up pad wetted with 95% ethyl alcohol. Very little color came off indicating that the stummel was clean.

The disturbingly dirty shank bothered me so, I decided to give it an overnight cotton-alcohol treatment. The bowl was stuffed with cotton balls while the airway was stuffed with more cotton.

The cotton was saturated with 95% ethyl alcohol until no additional alcohol could be absorbed with a disposable pipette.

The next day the cotton was removed.

The logo area was de-oiled with alcohol on a cotton swab. Yeah, I tried to mask it without de-oiling at first – unsuccess!

The stamps and logo were masked with painters tape to protect them from the upcoming sanding.

The fills were redone using a dab of brown cyanoacrylate (CA, super glue) applied with a fly tying bodkin. Briar dust was then pressed onto and into the wet CA. A quick dab of additional CA was applied to the top of the new fill.

The new fills were filed with a small flat file and smoothed with a 400 grit sanding sponge.

The pipe was then worked with a series of sanding sponges from 400-3500 grits. The stummel was wiped with a make-up pad wetted with alcohol between each sponge. The stem was rubbed with mineral oil and wiped with a paper towel between each sponge.

I then worked the pipe with 4000-12000 grit micro-mesh pads. Between each pad I repeated the above wiping except Obsidian Oil was used in place of mineral oil.

The pipe was then buffed with white buffing compound at the buffer.

The remaining buffing compound was removed with hand buffing and a rag then wiped with a make-up pad wetted with alcohol. The stummel then received a coat of Before and After Restoration Balm and was allowed to sit for 15 minutes.

The excess Restoration Balm was wiped from the stummel with an inside out athletic sock.

The stem logo was again cleaned with alcohol and a cotton swab.

To re-do the gold logo, I used Gold Leaf Rub’nBuff applied with a fly tying bodkin.

The excess gold leaf was wiped away with a paper towel.

The stem was then polished with Before and After Fine Polish followed by their Extra Fine Polish. Both were applied and hand buffed using a soft cotton cloth.

The pipe then received several coats of carnauba wax at the buffer.

The final step was another hand buff with the microfiber polishing cloth then off to the final photo shoot.

I don’t think I’ll ever tire of working on Peterson pipes. This pipe started out not needing much but in the end it is absolutely beautiful. The bird’s eyes on both sides are gorgeous. The vulcanite stem polished very nicely and with that briar band looks amazing. I have nothing against the 01 shape, it is just not my favorite but this pipe could change my mind on that. The hand feel and balance while clenching is very comfortable. The dimensions of the Peterson Kapp-Royal 01 Bent Pot are:

Length: 5.56 in./ 141.22 mm.

Weight: 1.74 oz./ 49.33 g.

Bowl Height: 1.79 in./ 45.47 mm.

Chamber Depth: 1.57 in./ 39.88 mm.

Chamber Diameter: 0.84 in./ 21.34 mm.

Outside Diameter: 1.44 in./ 36.57 mm.

I do hope that you have found something here useful to your own pipe care, maintenance or restorations. If you like this sort of thing, please click the like and subscribe buttons. Thank you for reading the ramblings of an old pipe lover.